IDES Prospector Already have an account? Login Here

IDES

Duranex® 3300

Polybutylene Terephthalate

Glass Fiber Reinforcement, 30%

Supplied by WinTech Polymer Ltd.

The technical datasheet with complete property values for Duranex® 3300 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 30% Filler by Weight
Automotive Specifications 
Part Marking Code (ISO 11469)
  • >PBT-GF30<
Physical
Nominal Value
Unit
Test Method
Specific Gravity      
--
 
ASTM D792
--
g/cm³
ISO 1183
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress      
Yield
psi
ISO 527-2
--
psi
ASTM D638
Tensile Elongation      
Break
%
ASTM D638
Break
%
ISO 527-2
Flexural Modulus      
--
psi
ASTM D790
--
psi
ISO 178
Flexural Strength      
--
psi
ASTM D790
--
psi
ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
ft·lb/in²
ISO 179/1eA
Notched Izod Impact (0.250 in)
ft·lb/in
ASTM D256
Reverse Notch Izod Impact
ft·lb/in
ASTM D256
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Unannealed)
°F
ASTM D648, ISO 75-2/A
CLTE      
Flow
in/in/°F
ASTM D696
Flow: 73 to 131°F
in/in/°F
ISO 11359-2
Transverse
in/in/°F
ASTM D696
Transverse: 73 to 131°F
in/in/°F
ISO 11359-2
Electrical
Nominal Value
Unit
Test Method
Volume Resistivity      
0.118 in
ohm·cm
ASTM D257
--
ohm·cm
IEC 60093
Dielectric Strength      
0.0787 in
V/mil
ASTM D149
0.118 in
V/mil
IEC 60243-1
Arc Resistance
sec
ASTM D495
Comparative Tracking Index      
--
V
IEC 60112
--
V
ASTM D3638
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
 
UL 94
UL File Number
 
 
Additional Information
Nominal Value
Unit
Test Method
Color Number
 
 
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Duranex® 3300, Duranex 3300, Duranex® , Duranex, Duranex3300, 3300, Polybutylene Terephthalate, PBT, Polyester, WinTech, PolybutyleneTerephthalate
Automotive Specifications
This plastic material has approval for 1 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): GM (1).
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.