IDES Prospector Already have an account? Login Here

IDES

Hostalen GD 9550 F

High Density Polyethylene

Supplied by LyondellBasell Industries

The technical datasheet with complete property values for Hostalen GD 9550 F is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Hostalen GD 9550F is a high density polyethylene. Films made of Hostalen GD 9550F provide a good barrier against water vapour. It contains antioxidants and is delivered in pellet form.

Foodlaw compliance information about this product can be found in separate product documentation.

This product is not intended for use in medical and pharmaceutical applications.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Additive 
  • Antioxidant
Features 
  • Antioxidant
  • Good Flow
  • Low Gel
  • Moisture Barrier
  
Uses 
  • Film
  • Food Packaging
  • Packaging
  • Plastics Modification
  
Forms 
  • Pellets
Processing Method 
  • Blown Film
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR)
     ISO 1133
190°C/21.6 kg
g/10 min
  
190°C/5.0 kg
g/10 min
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2
Tensile Stress (Yield)
psi
 ISO 527-2
Tensile Strain (Yield)
%
 ISO 527-2
Films
Nominal Value
Unit
Test Method
Film Thickness - Tested
mil
  
Film Thickness - Recommended / Available
 
  
Tensile Strength
     ISO 527-3
MD: 1.2 mil, Blown Film
psi
  
TD: 1.2 mil, Blown Film
psi
  
Tensile Elongation - MD (Break, 1.2 mil, Blown Film)
%
 ISO 527-3
Dart Drop Impact (1.2 mil, Blown Film)
g
 ASTM D1709
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ISO 306/B50
Additional Information
Nominal Value
Unit
Test Method
Staudinger Index
in³/lb
 ISO 1628
Film properties tested using 30 µm thickness blown film extruded at a melt temperature of 190°C and a blow-up ratio of 2.65:1.
Related Terminology
This supplier and product may also be known by these terms: LyondellBasell Industries, Lyondell, Basell, Bassell, Basell Polyolefins, Bassel

Product names can be difficult to match. You may have searched any one of these terms to find this product: Hostalen GD 9550 F, Hostalen , HostalenGD9550F, GD 9550 F, GD9550, 9550F, GD9550F, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, PE, LyondellBasell, PolyethyleneHighDensity, 9550GD
Features
Features may also be described by the following terms: Low Gel, Good Flow, Moisture Barrier.
Uses
Uses may also be described by the following terms: Plastics Modification, Plastic Modification, Food Packaging.
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.