IDES Prospector Already have an account? Login Here

IDES

Hostalen GD 9555

High Density Polyethylene

Supplied by LyondellBasell Industries

The technical datasheet with complete property values for Hostalen GD 9555 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
Additive 
  • Antioxidant
Features 
  • Antioxidant
  • Good Flow
  • Good Organoleptic Properties
  • High ESCR (Stress Crack Resist.)
  • High Impact Resistance
  • Low Gel
  • Moisture Barrier
Uses 
  • Film
  • Food Packaging
  • Plastics Modification
  • Profiles
  • Reinforced Panels
  • Sheet
  • Stretch Wrap
Processing Method 
  • Blown Film
  • Film Extrusion
  • Pipe Extrusion
  • Sheet Extrusion
  
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR)
     ISO 1133
190°C/2.16 kg
g/10 min
  
190°C/21.6 kg
g/10 min
  
190°C/5.0 kg
g/10 min
  
Full Notch Creep Test 2 (176°F)
hr
 ISO 16770
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2
Tensile Stress (Yield)
psi
 ISO 527-2
Tensile Strain (Yield)
%
 ISO 527-2
Films
Nominal Value
Unit
Test Method
Film Thickness - Tested
mil
  
Film Thickness - Recommended / Available
 
  
Tensile Strength
     ISO 527-3
MD: 1.2 mil, Blown Film
psi
  
TD: 1.2 mil, Blown Film
psi
  
Tensile Elongation - MD (Break, 1.2 mil, Blown Film)
%
 ISO 527-3
Dart Drop Impact 3 (1.2 mil, Blown Film)
g
 ASTM D1709
Elmendorf Tear Strength
     ISO 6383-2
MD: 1.2 mil, Blown Film
lbf
  
TD: 1.2 mil, Blown Film
lbf
  
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (-22°F)
ft·lb/in²
 ISO 179/1eA
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D)
 
 ISO 868
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ISO 306/B50
Additional Information
Nominal Value
Unit
Test Method
Staudinger Index
in³/lb
 ISO 1628
Related Terminology
This supplier and product may also be known by these terms: LyondellBasell Industries, Lyondell, Basell, Bassell, Basell Polyolefins, Bassel

Product names can be difficult to match. You may have searched any one of these terms to find this product: Hostalen GD 9555, Hostalen , HostalenGD9555, GD 9555, GD9555, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, PE, LyondellBasell, PolyethyleneHighDensity, 9555GD
Features
Features may also be described by the following terms: Good Organoleptic Properties, High Impact Resistance, Low Gel, Good Flow, High Environmental Stress Cracking Resistance, High ESCR, Stress Cracking Resistant, Moisture Barrier.
Uses
Uses may also be described by the following terms: Plastics Modification, Plastic Modification, Food Packaging, Reinforced Panels, Reinforced Panel, Stretch Wrap.
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
23.5 MPa, 2% Arcopal
33:1 BUR, 190°C
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.