Already have an account? Login Here

IDES

Vectra® A230

Liquid Crystal Polymer

Carbon Fiber Reinforcement, 30%

Supplied by Polyplastics Co., Ltd.

The technical datasheet with complete property values for Vectra® A230 is available to members of the Prospector Plastics Database.
Register to view full datasheet.

General
Material Status	Commercial: Active
Availability	Asia Pacific
Filler / Reinforcement	Carbon Fiber Reinforcement, 30% Filler by Weight
Part Marking Code (ISO 11469)	>LCP-CF30<

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Molding Shrinkage²
Across Flow: 0.0394 in		%
Flow: 0.0394 in		%
Mechanical	Nominal Value	Unit	Test Method
Tensile Strength		psi	ASTM D638
Tensile Elongation (Break)		%	ASTM D638
Flexural Modulus		psi	ISO 178
Flexural Strength		psi	ISO 178
Flexural Strain		%	ISO 178
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength		ft·lb/in²	ISO 179/1eA
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature (264 psi, Unannealed)		°F	ISO 75-2/A
Electrical	Nominal Value	Unit	Test Method
Volume Resistivity		ohm·cm	IEC 60093
Flammability	Nominal Value	Unit	Test Method
Flame Rating - UL			UL 94
UL File Number
Additional Information	Nominal Value	Unit	Test Method
Color Number
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Vectra® A230, Vectra A230, Vectra® , Vectra, VectraA230, A 230, A230, Liquid Crystal Polymer, LCP, Polyplastics, LiquidCrystalPolymer, 230A

Notes

¹Typical properties: these are not to be construed as specifications.

²80x80x1 mm, 79 MPa

Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.