IDES Prospector Already have an account? Login Here

IDES

Adflex KE051P

Thermoplastic Polyolefin Elastomer

Supplied by LyondellBasell Industries

The technical datasheet with complete property values for Adflex KE051P is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Adflex KE051P medium melt flow, 820 MPa flexural modulus, reactor grade thermoplastic elastomeric olefin (TEO) resin has an excellent balance of impact, stiffness and paintability. It is based on material produced from Basell's proprietary Catalloy process.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Good Colorability
  • Good Impact Resistance
  • Good Processability
  • Good Stiffness
  • Medium Flow
  • Paintable
Uses 
  • Automotive Interior Parts
Automotive Specifications 
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ASTM D1238, ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress (Yield)
psi
 ISO 527-2
Tensile Strain (Yield)
%
 ISO 527-2
Flexural Modulus
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact Strength
     ISO 180
-40°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D)
 
 ISO 868
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
      
66 psi, Unannealed
°F
 ISO 75-2/B
264 psi, Unannealed
°F
 ISO 75-2/A
CLTE - Flow (-22 to 212°F)
in/in/°F
 ASTM E228, ISO 11359-2
Related Terminology
This supplier and product may also be known by these terms: LyondellBasell Industries, Lyondell, Basell, Bassell, Basell Polyolefins, Bassel

Product names can be difficult to match. You may have searched any one of these terms to find this product: Adflex KE051P, Adflex , AdflexKE051P, KE 051 P, KE051P, KE051, 051P, TPO, Thermoplastic Polyolefin Elastomer, TPO (POE), TPO POE, Thermoplastic Elastomer, TPE, LyondellBasell, ThermoplasticPolyolefinElastomer, TPOPOE, ThermoplasticElastomer, 051KE
Features
Features may also be described by the following terms: Good Stiffness, Good Impact Resistance, Good Processability, Easy Processing, Good Colorability, Medium Flow, Medium Melt, Medium MFI.
Automotive Specifications
This plastic material has approval for 2 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): CHRYSLER (2).
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.