IDES Prospector Already have an account? Login Here

IDES

Vectra® C130

Liquid Crystal Polymer

Glass Fiber Reinforcement, 30%

Supplied by Polyplastics Co., Ltd.

The technical datasheet with complete property values for Vectra® C130 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 30% Filler by Weight
Features 
  • Medium Heat Resistance
Part Marking Code (ISO 11469)
  • >LCP-GF30<
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Molding Shrinkage
     ASTM D955
Flow: 0.0394 in
in/in
  
Across Flow: 0.0394 in
in/in
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength
psi
 ASTM D638
Tensile Elongation (Break)
%
 ASTM D638
Flexural Modulus
psi
 ISO 178
Flexural Strength (2.5% Strain)
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
ft·lb/in²
 ISO 179/1eA
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
 ISO 75-2/A
Electrical
Nominal Value
Unit
Test Method
Volume Resistivity
ohm·cm
 IEC 60093
Dielectric Constant
     IEC 60250
1 kHz
 
  
1 MHz
 
  
Dissipation Factor
     IEC 60250
1 kHz
 
  
1 MHz
 
  
Arc Resistance
sec
 ASTM D495
Comparative Tracking Index
V
 IEC 60112
Electric Strength
     IEC 60243-1
0.0394 in
V/mil
  
0.118 in
V/mil
  
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
 
 UL 94
UL File Number
 
  
Additional Information
Nominal Value
Unit
Test Method
Color Number
 
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Vectra® C130, Vectra C130, Vectra® , Vectra, VectraC130, C 130, C130, Liquid Crystal Polymer, LCP, Polyplastics, LiquidCrystalPolymer, 130C
Features
Features may also be described by the following terms: Medium Heat Resistance.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.