IDES Prospector Already have an account? Login Here

IDES

PSC Urethane PCA 306 (70/30)

Polyurethane (Polyester, TDI)

Supplied by Polyurethane Specialties Company

The technical datasheet with complete property values for PSC Urethane PCA 306 (70/30) is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
PCA 306 (70/30) is PCA 306 Elastomer cured with 70% PCA Curative 34 and 30% Methylene (bis-o-Chloroaniline).

PCA 306 (70/30) has been cured 1 hour at 212°F and postcured 24 hours at 212°F.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Forms 
  • Pellets
Elastomers
Nominal Value
Unit
Test Method
Tensile Stress
     ASTM D412
100% Strain
psi
  
300% Strain
psi
  
Tensile Strength (Break)
psi
 ASTM D412
Tensile Elongation (Break)
%
 ASTM D412
Tear Strength
      
-- 2
lbf/in
 ASTM D624
Split
lbf/in
 ASTM D470
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore A)
 
 ASTM D2240
Thermoset
Nominal Value
Unit
Test Method
Thermoset Components
      
Hardener
 
  
Resin
 
  
Pot Life
min
  
Thermoset Mix Viscosity (212°F)
cP
 ASTM D2393
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: PSC Urethane PCA 306, PSC Urethane PCA 306 (70/30), PSC Urethane PCA 306 7030, PSC Urethane , PSCUrethanePCA3067030, PSCUrethane, UrethanePCA 306, PCA 306 (70, PCA 306 70, UrethanePCA 306 (70/30), UrethanePCA 306 7030, UrethanePCA 306 (70:30), UrethanePCA 306 (70+30), UrethanePCA 306 (70-30), UrethanePCA 306 (70_30), UrethanePCA 306 (70 30), UrethanePCA306, UrethanePCA 306 (70, UrethanePCA 306 70, PCA 306, PCA30670, UrethanePCA3067030, UrethanePCA 306 70_30, UrethanePCA 306 70 30, UrethanePCA30670, PCA 306 (70/30), PCA 306 7030, PCA 306 (70:30), PCA 306 (70+30), PCA 306 (70-30), PCA 306 (70_30), PCA 306 (70 30), PCA306, 30670, 7030, UrethanePCA30670_30, PCA3067030, PCA 306 70_30, PCA 306 70 30, Polyurethane, PCA30670_30, Polyurethane (Polyester, TDI), Polyurethane Polyester TDI, PUR-Ester/TDI, PUREsterTDI, PUR-Ester:TDI, PUR-Ester+TDI, PUR-Ester-TDI, PUR-Ester_TDI, PUR-Ester TDI, PUR:Ester/TDI, PUR/Ester/TDI, PUR+Ester/TDI, PUR_Ester/TDI, PUR Ester/TDI, PUR, PUR Specialties, PolyurethanePolyesterTDI, PUREster_TDI, PUREster TDI, PUR_EsterTDI, PUR EsterTDI, 306PCA, 306UrethanePCA
Injection Notes
Prepolymer Temperature: 212°F
Curative Temperature: 80°F
Notes
1Typical properties: these are not to be construed as specifications.
2Die C
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.