IDES Prospector Already have an account? Login Here

IDES

PSC Urethane PCA 306S

Polyurethane (Polyester, TDI)

Supplied by Polyurethane Specialties Company

The technical datasheet with complete property values for PSC Urethane PCA 306S is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
PCA 306S has been cured 7 minutes at 250°F and postcured 24 hours at 212°F.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Forms 
  • Pellets
Processing Method 
  • Casting
Elastomers
Nominal Value
Unit
Test Method
Tensile Stress
    ASTM D412
100% Strain
psi
 
300% Strain
psi
 
Tensile Strength (Break)
psi
ASTM D412
Tensile Elongation (Break)
%
ASTM D412
Tear Strength
     
-- 2
lbf/in
ASTM D624
Split
lbf/in
ASTM D470
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore A)
 
ASTM D2240
Thermoset
Nominal Value
Unit
Test Method
Thermoset Components
     
Hardener
 
 
Resin
 
 
Pot Life
min
 
Thermoset Mix Viscosity (212°F)
cP
ASTM D2393
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: PSC Urethane PCA 306S, PSC Urethane , PSCUrethanePCA306S, PSCUrethane, UrethanePCA 306 S, UrethanePCA 306S, UrethanePCA306, Urethane, PCA 306 S, UrethanePCA306S, PCA 306S, PCA306, 306S, PCA306S, Polyurethane, Polyurethane (Polyester, TDI), Polyurethane Polyester TDI, PUR-Ester/TDI, PUREsterTDI, PUR-Ester:TDI, PUR-Ester+TDI, PUR-Ester-TDI, PUR-Ester_TDI, PUR-Ester TDI, PUR:Ester/TDI, PUR/Ester/TDI, PUR+Ester/TDI, PUR_Ester/TDI, PUR Ester/TDI, PUR, PUR Specialties, PolyurethanePolyesterTDI, PUREster_TDI, PUREster TDI, PUR_EsterTDI, PUR EsterTDI, 306PCA, 306UrethanePCA
Injection Notes
Prepolymer Temperature: 212°F
Curative Temperature: 235°F
Notes
1Typical properties: these are not to be construed as specifications.
2Die C
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.