NORYL* SE1GFN2 Resin SABIC IP Polyphenylene Ether + PS (Glass Fiber Reinforcement, 20%)

Product Description

PPE+PS blend. 20% Glass reinforced. Non-brominated, non-chlorinated FR system. UL94 V1 and 5VA listing. RTI 110/105/110. Dielectric strength. Dimensional stability. Suitable for E/E applications.

General

Material Status

Commercial: Active

Availability

North America

Filler / Reinforcement

Glass Fiber Reinforcement, 20% Filler by Weight

Additive

Flame Retardant

Features

Bromine Free

Chlorine Free

Flame Retardant

Good Dimensional Stability

Uses

Electrical/Electronic Applications

Processing Method

Injection Molding

Multi-Point Data

Coefficient of Thermal Expansion vs. Temperature (ASTM E831)

Elastic Modulus vs Temperature (ASTM D4065)

Flexural DMA (ASTM D4065)

Specific Heat vs. Temperature (ASTM D3417)

Tensile Creep (ASTM D2990)

Tensile Fatigue

Tensile Stress vs. Strain (ASTM D638)

Viscosity vs. Shear Rate (ASTM D3835)

Physical	Nominal Value	Unit	Test Method
Specific Gravity			ASTM D792
Molding Shrinkage - Flow (0.126 in)		in/in	Internal Method
Water Absorption (24 hr)		%	ASTM D570
Mechanical	Nominal Value	Unit	Test Method
Tensile Strength² (Break)		psi	ASTM D638
Tensile Elongation² (Break)		%	ASTM D638
Flexural Modulus³ (3.94 in Span)		psi	ASTM D790
Flexural Strength³ (Yield, 3.94 in Span)		psi	ASTM D790
Impact	Nominal Value	Unit	Test Method
Notched Izod Impact			ASTM D256
-40°F		ft·lb/in
73°F		ft·lb/in
Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness (L-Scale)			ASTM D785
Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load			ASTM D648
66 psi, Unannealed, 0.252 in		°F
264 psi, Unannealed, 0.252 in		°F
CLTE - Flow (-40 to 203°F)		in/in/°F	ASTM E831
Electrical	Nominal Value	Unit	Test Method
Dielectric Strength (0.126 in, in Oil)		V/mil	ASTM D149
Dielectric Constant			ASTM D150
50 Hz
60 Hz
Dissipation Factor			ASTM D150
50 Hz
60 Hz
Arc Resistance (PLC)⁴			ASTM D495
Flammability	Nominal Value	Unit	Test Method
Flame Rating - UL			UL 94
0.0580 in
0.236 in
0.0984 in
Oxygen Index		%	ASTM D2863
UL	Nominal Value	Unit	Test Method
RTI Str		°F	UL 746
RTI Imp		°F	UL 746
RTI Elec		°F	UL 746
Comparative Tracking Index (CTI) (PLC)			UL 746
High Voltage Arc Tracking Rate (HVTR) (PLC)			UL 746
Hot-wire Ignition (HWI) (PLC)			UL 746
High Amp Arc Ignition (HAI) (PLC)			UL 746
Related Terminology
This supplier and product may also be known by these terms: GE Plastics, LNP Engineering Plastics, GE Polymerland Product names can be difficult to match. You may have searched any one of these terms to find this product: NORYL* SE1GFN2 Resin, NORYL SE1GFN2 Resin, NORYL* , NORYL, NORYLSE1GFN2Resin, SE 1 GFN 2 Resin, SE1GFN2 Resin, SE1, 1GFN, GFN2, 2Resin, SE1GFN2Resin, Polyphenylene Ether + PS, Polyphenylene Ether PS, Polyphenylene Ether : PS, Polyphenylene Ether / PS, Polyphenylene Ether - PS, Polyphenylene Ether _ PS, Polyphenylene Ether PS, PPE+PS, PPEPS, PPE:PS, PPE/PS, PPE-PS, PPE_PS, PPE PS, Polyphenylene Ether, PPE, SABIC IP, PolyphenyleneEtherPS, PolyphenyleneEther, PolyphenyleneEther_PS, 1SE
Generic Name
Generic Name may also be described by the following terms: PPO.
Features
Features may also be described by the following terms: Bromine Free, No Bromine Content, No Chlorine Content, Chlorine Free, Good Dimensional Stability, Dimensionally Stable.
Uses
Uses may also be described by the following terms: Electrical Applications, Electronic Applications, Electrical/Electronic Applications, Electrical Sector.

Injection	Nominal Value	Unit
Drying Temperature		°F
Drying Time		hr
Drying Time, Maximum		hr
Suggested Max Moisture		%
Suggested Shot Size		%
Rear Temperature		°F
Middle Temperature		°F
Front Temperature		°F
Nozzle Temperature		°F
Processing (Melt) Temp		°F
Mold Temperature		°F
Back Pressure		psi
Screw Speed		rpm

Notes

¹Typical properties: these are not to be construed as specifications.

²Type I, 0.20 in/min

³0.10 in/min

⁴Tungsten Electrode

NORYL* SE1GFN2 Resin

Polyphenylene Ether + PS

Glass Fiber Reinforcement, 20%

Supplied by SABIC Innovative Plastics