IDES Prospector Already have an account? Login Here

IDES

Andur 2-60DP/Curene® 280

Polyurethane (Polyether, TDI)

Supplied by Anderson Development Company

The technical datasheet with complete property values for Andur 2-60DP/Curene® 280 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
All properties based on Andur® 2-90DP cured with Curene® 280
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Forms 
  • Liquid
Processing Method 
  • Casting
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength
psi
 ASTM D638
Tensile Elongation (Break)
%
 ASTM D638
Elastomers
Nominal Value
Unit
Test Method
Tensile Stress
     ASTM D412
100% Strain
psi
  
300% Strain
psi
  
Tear Strength
      
-- 2
lbf/in
 ASTM D624
Split
lbf/in
 ASTM D470
Compression Set
%
 ASTM D395
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore A)
 
 ASTM D2240
Thermoset
Nominal Value
Unit
Test Method
Post Cure Time (73°F)
hr
  
Additional Information
Prepolymer NCO%: 6.8-7.2
Grams Curene® 280 per 100 grams prepolymer: 44.3
Rebound, %: 47
Stoichiometry: 0.95
Prepolymer Temperature, °F: 190-210
Curene® 280 Temperature, °F: 158
Post Cure Time, 212°F, hours: 16
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Andur 2-60DP/Curene® 280, Andur 260DPCurene 280, Andur , Andur260DPCurene280, 2 60 DP Curene 280, 2-60DP/Curene® 280, 260DPCurene 280, 2-60DP:Curene® 280, 2-60DP+Curene® 280, 2-60DP-Curene® 280, 2-60DP_Curene® 280, 2-60DP Curene® 280, 2:60DP/Curene® 280, 2/60DP/Curene® 280, 2+60DP/Curene® 280, 2_60DP/Curene® 280, 2 60DP/Curene® 280, 260, 60DP, DPCurene, Curene280, 260DPCurene280, 260DP_Curene 280, 260DP Curene 280, 2_60DPCurene 280, 2 60DPCurene 280, Polyurethane, 260DP_Curene280, 2_60DPCurene280, Polyurethane (Polyether, TDI), Polyurethane Polyether TDI, PUR-Ether/TDI, PUREtherTDI, PUR-Ether:TDI, PUR-Ether+TDI, PUR-Ether-TDI, PUR-Ether_TDI, PUR-Ether TDI, PUR:Ether/TDI, PUR/Ether/TDI, PUR+Ether/TDI, PUR_Ether/TDI, PUR Ether/TDI, PUR, Anderson, PolyurethanePolyetherTDI, PUREther_TDI, PUREther TDI, PUR_EtherTDI, PUR EtherTDI, 602
Injection
Nominal Value
Unit
 
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
2Die C
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.