IDES Prospector Already have an account? Login Here

IDES

PSC Urethane PCA 1101 (95/5)

Polyurethane (Polyester, MDI)

Supplied by Polyurethane Specialties Company

The technical datasheet with complete property values for PSC Urethane PCA 1101 (95/5) is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
PCA 1101 (95/5) is PCA 1101 Elastomer cured with 95% PCA Curative 420 and 5% PCA Curative 10. PCA 1101 (95/5) has been cured 20 minutes at 250°F and postcured 20 hours at 230°F. PCA 1101 (95/5) may solidify upon prolonged standing.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Agency Ratings 
Forms 
  • Liquid
Elastomers
Nominal Value
Unit
Test Method
Tensile Stress
     ASTM D412
100% Strain
psi
  
300% Strain
psi
  
Tensile Strength (Break)
psi
 ASTM D412
Tensile Elongation (Break)
%
 ASTM D412
Tear Strength
      
-- 2
lbf/in
 ASTM D624
Split
lbf/in
 ASTM D470
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore A)
 
 ASTM D2240
Thermoset
Nominal Value
Unit
Test Method
Thermoset Components
      
Hardener
 
  
Resin
 
  
Pot Life
min
  
Thermoset Mix Viscosity (212°F)
cP
 ASTM D2393
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: PSC Urethane PCA 1101, PSC Urethane PCA 1101 (95/5), PSC Urethane PCA 1101 955, PSC Urethane , PSCUrethanePCA1101955, PSCUrethane, UrethanePCA 1101, PCA 1101 (95, PCA 1101 95, UrethanePCA 1101 (95/5), UrethanePCA 1101 955, UrethanePCA 1101 (95:5), UrethanePCA 1101 (95+5), UrethanePCA 1101 (95-5), UrethanePCA 1101 (95_5), UrethanePCA 1101 (95 5), UrethanePCA1101, UrethanePCA 1101 (95, UrethanePCA 1101 95, PCA 1101, PCA110195, UrethanePCA1101955, UrethanePCA 1101 95_5, UrethanePCA 1101 95 5, UrethanePCA110195, PCA 1101 (95/5), PCA 1101 955, PCA 1101 (95:5), PCA 1101 (95+5), PCA 1101 (95-5), PCA 1101 (95_5), PCA 1101 (95 5), PCA1101, 110195, 955, UrethanePCA110195_5, PCA1101955, PCA 1101 95_5, PCA 1101 95 5, Polyurethane, PCA110195_5, Polyurethane (Polyester, MDI), Polyurethane Polyester MDI, PUR-Ester/MDI, PUREsterMDI, PUR-Ester:MDI, PUR-Ester+MDI, PUR-Ester-MDI, PUR-Ester_MDI, PUR-Ester MDI, PUR:Ester/MDI, PUR/Ester/MDI, PUR+Ester/MDI, PUR_Ester/MDI, PUR Ester/MDI, PUR, PUR Specialties, PolyurethanePolyesterMDI, PUREster_MDI, PUREster MDI, PUR_EsterMDI, PUR EsterMDI, 1101PCA, 1101UrethanePCA
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
Injection Notes
Prepolymer Temperature: 212°F
Curative Temperature: 140°F
Notes
1Typical properties: these are not to be construed as specifications.
2Die C
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.