IDES Prospector Already have an account? Login Here

IDES

Andur 5-DP-LM/Curene® 3005

Polyurethane (Polyester, TDI)

Supplied by Anderson Development Company

The technical datasheet with complete property values for Andur 5-DP-LM/Curene® 3005 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
All properties based on Andur® 5-DP-LM cured with Curene® 3005
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Forms 
  • Liquid
Processing Method 
  • Casting
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength
psi
 ASTM D638
Tensile Elongation (Break)
%
 ASTM D638
Elastomers
Nominal Value
Unit
Test Method
Tensile Stress
     ASTM D412
100% Strain
psi
  
300% Strain
psi
  
Tear Strength
      
-- 2
lbf/in
 ASTM D624
Split
lbf/in
 ASTM D470
Compression Set
%
 ASTM D395
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore A)
 
 ASTM D2240
Thermoset
Nominal Value
Unit
Test Method
Pot Life
min
  
Demold Time
min
  
Post Cure Time (73°F)
hr
  
Additional Information
Prepolymer NCO%: 5.0-5.4
Grams Curene® 3005 per 100 grams prepolymer: 32.9
Rebound, %: 32
Stoichiometry: 0.95
Prepolymer Temperature, °F: 190-210
Curene® 3005 Temperature, °F: 158
Post Cure Time, 212°F, hours: 16
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Andur 5-DP-LM/Curene® 3005, Andur 5DPLMCurene 3005, Andur , Andur5DPLMCurene3005, 5 DP LM Curene 3005, 5-DP-LM/Curene® 3005, 5DPLMCurene 3005, 5-DP-LM:Curene® 3005, 5-DP-LM+Curene® 3005, 5-DP-LM-Curene® 3005, 5-DP-LM_Curene® 3005, 5-DP-LM Curene® 3005, 5:DP:LM/Curene® 3005, 5/DP/LM/Curene® 3005, 5+DP+LM/Curene® 3005, 5_DP_LM/Curene® 3005, 5 DP LM/Curene® 3005, 5DP, DPLM, LMCurene, Curene3005, 5DPLMCurene3005, 5DPLM_Curene 3005, 5DPLM Curene 3005, 5_DP_LMCurene 3005, 5 DP LMCurene 3005, Polyurethane, 5DPLM_Curene3005, 5_DP_LMCurene3005, Polyurethane (Polyester, TDI), Polyurethane Polyester TDI, PUR-Ester/TDI, PUREsterTDI, PUR-Ester:TDI, PUR-Ester+TDI, PUR-Ester-TDI, PUR-Ester_TDI, PUR-Ester TDI, PUR:Ester/TDI, PUR/Ester/TDI, PUR+Ester/TDI, PUR_Ester/TDI, PUR Ester/TDI, PUR, Anderson, PolyurethanePolyesterTDI, PUREster_TDI, PUREster TDI, PUR_EsterTDI, PUR EsterTDI, DP5
Injection
Nominal Value
Unit
 
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
2Die C
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.