IDES Prospector Already have an account? Login Here

IDES

NORYL* EN265 Resin

Polyphenylene Ether + PS

Supplied by SABIC Innovative Plastics

The technical datasheet with complete property values for NORYL* EN265 Resin is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Extrusion grade. 254F (123C) DTUL. UL94 V-1 rated.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Processing Method 
  • Extrusion
Multi-Point Data 
  • Elastic Modulus vs Temperature (ASTM D4065)
  • Specific Heat vs. Temperature (ASTM D3417)
  • Tensile Creep (ASTM D2990)
  • Tensile Stress vs. Strain (ASTM D638)
  
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Molding Shrinkage - Flow (0.126 in)
in/in
 Internal Method
Water Absorption (24 hr)
%
 ASTM D570
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2 (Yield)
psi
 ASTM D638
Tensile Elongation 2 (Break)
%
 ASTM D638
Flexural Modulus 3 (3.94 in Span)
psi
 ASTM D790
Flexural Strength 3 (Yield, 3.94 in Span)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
     ASTM D256
-40°F
ft·lb/in
  
73°F
ft·lb/in
  
Gardner Impact
     ASTM D3029
-40°F
in·lb
  
-22°F
in·lb
  
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
 ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Unannealed, 0.252 in)
°F
 ASTM D648
CLTE - Flow (-40 to 203°F)
in/in/°F
 ASTM E831
Electrical
Nominal Value
Unit
Test Method
Dielectric Strength (0.126 in, in Oil)
V/mil
 ASTM D149
Dielectric Constant
     ASTM D150
50 Hz
 
  
60 Hz
 
  
Dissipation Factor
     ASTM D150
50 Hz
 
  
60 Hz
 
  
Arc Resistance (PLC) 4
 
 ASTM D495
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
     UL 94
0.0590 in
 
  
0.236 in
 
  
Oxygen Index
%
 ASTM D2863
Radiant Panel Listing (UL)
 
  
UL
Nominal Value
Unit
Test Method
RTI Str
°F
 UL 746
RTI Imp
°F
 UL 746
RTI Elec
°F
 UL 746
Comparative Tracking Index (CTI) (PLC)
 
 UL 746
High Voltage Arc Tracking Rate (HVTR) (PLC)
 
 UL 746
Outdoor Suitability
 
 UL 746C
Related Terminology
This supplier and product may also be known by these terms: GE Plastics, LNP Engineering Plastics, GE Polymerland

Product names can be difficult to match. You may have searched any one of these terms to find this product: NORYL* EN265 Resin, NORYL EN265 Resin, NORYL* , NORYL, NORYLEN265Resin, EN 265 Resin, EN265 Resin, EN265, 265Resin, EN265Resin, Polyphenylene Ether + PS, Polyphenylene Ether PS, Polyphenylene Ether : PS, Polyphenylene Ether / PS, Polyphenylene Ether - PS, Polyphenylene Ether _ PS, Polyphenylene Ether PS, PPE+PS, PPEPS, PPE:PS, PPE/PS, PPE-PS, PPE_PS, PPE PS, Polyphenylene Ether, PPE, SABIC IP, PolyphenyleneEtherPS, PolyphenyleneEther, PolyphenyleneEther_PS, 265EN
Generic Name
Generic Name may also be described by the following terms: PPO.
Extrusion
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Cylinder Zone 1 Temp.
°F
  
Cylinder Zone 2 Temp.
°F
  
Cylinder Zone 3 Temp.
°F
  
Cylinder Zone 4 Temp.
°F
  
Adapter Temperature
°F
  
Melt Temperature
°F
  
Die Temperature
°F
  
Extrusion Notes
Drying Time (Cumulative): 8 hrs
Notes
1Typical properties: these are not to be construed as specifications.
2Type I, 2.0 in/min
30.10 in/min
4Tungsten Electrode
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.