IDES Prospector Already have an account? Login Here

IDES

WPP PP PPH1CF-2

Polypropylene Homopolymer

Calcium Carbonate Filler, 20%

Supplied by Washington Penn Plastic Co. Inc.

The technical datasheet with complete property values for WPP PP PPH1CF-2 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Modified compounds with extra heat stabilization for extended high temperature service. Compounds with improved gloss. Available in colors to meet FDA regulations.
Note: Custom colors available upon request.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Filler / Reinforcement 
  • Calcium Carbonate Filler, 20% Filler by Weight
Features 
  • Good Melt Strength
  • Good Processability
  • High Molecular Weight
  • Homopolymer
  • Low Flow
Uses 
  • Household Goods
  • Packaging
  
Forms 
  • Pellets
Processing Method 
  • Blow Molding
  • Extrusion
  • Thermoforming
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ASTM D1238
Molding Shrinkage - Flow
in/in
 ASTM D955
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2 (Yield)
psi
 ASTM D638
Tensile Elongation 2 (Break)
%
 ASTM D638
Flexural Modulus - Tangent
psi
 ASTM D790
Flexural Strength
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
     ASTM D256
-22°F, 0.125 in
ft·lb/in
  
73°F, 0.125 in
ft·lb/in
  
Unnotched Izod Impact (73°F, 0.125 in)
ft·lb/in
 ASTM D256
Gardner Impact
     ASTM D3029
-22°F
in·lb
  
73°F
in·lb
  
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
 ASTM D785
Durometer Hardness (Shore D)
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     ASTM D648
66 psi, Unannealed
°F
  
264 psi, Unannealed
°F
  
Additional Information
Flexural Modulus, ASTM D790, 2% Secant: 193000 psi
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: WPP PP PPH1CF-2, WPP PP PPH1CF2, WPP PP , WPPPPPPH1CF2, WPPPP, PPH 1 CF, PPPPH 1 CF 2, PPPPH 1 CF, PPH1CF, PPPPH1CF-2, PPPPH1CF2, PPPPH1CF:2, PPPPH1CF/2, PPPPH1CF+2, PPPPH1CF_2, PPPPH1CF 2, PPPPH1, PPPPH1CF, PPH 1 CF 2, PPH1CF-2, PPH1CF2, PPH1CF:2, PPH1CF/2, PPH1CF+2, PPH1CF_2, PPH1CF 2, PPH1, 1CF, CF2, Polypropylene Homopolymer, PP Homopolymer, Polypropylene, PP, Washington Penn, PolypropyleneHomopolymer, PPHomopolymer, 1PPH, 1PPPPH
Features
Features may also be described by the following terms: Low Flow, Low Melt, Low MFI, High Molecular Weight, High MW, Good Melt Strength, Good Processability, Easy Processing.
Uses
Uses may also be described by the following terms: Household Goods, Housewares.
Injection
Nominal Value
Unit
 
Suggested Max Regrind
%
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Pressure
psi
  
Injection Rate
 
  
Clamp Tonnage
tons/in²
  
Notes
1Typical properties: these are not to be construed as specifications.
22.0 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.