IDES Prospector Already have an account? Login Here

IDES

Bexloy® W 501 NC

Ionomer

Supplied by DuPont Packaging & Industrial Polymers

The technical datasheet with complete property values for Bexloy® W 501 NC is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
  
Additive 
  • Color Stabilizer
Features 
  • High Impact Resistance
  • Scratch Resistant
  
Uses 
  • Automotive Exterior Parts
Appearance 
  • Colors Available
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Molding Shrinkage - Flow
in/in
 ASTM D955
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (73°F)
psi
 ASTM D638
Tensile Elongation (Break, 73°F)
%
 ASTM D638
Flexural Modulus - Tangent (73°F)
psi
 ASTM D790
Elastomers
Nominal Value
Unit
Test Method
Tear Strength 2 (73°F)
lbf/in
 ASTM D624
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (-22°F)
ft·lb/in
 ASTM D256
Gardner Impact (-22°F)
in·lb
 ASTM D3029
Thermal
Nominal Value
Unit
Test Method
CLTE - Flow (-22 to 176°F)
in/in/°F
 ASTM E831
Additional Information
Heat Sag, ASTM D3769, 152mm (6in) overhang, 30min, @ 180°F: 0.5in
Gardner Impact, ASTM D3209, -22°F: >320 in-lb
Rheometric Impact, ultimate energy, 5mph, 1/2in dia. Tup, 3in dia. Ring, 73°F: 194 in-lb
Rheometric Impact, ultimate energy, 5mph, 1/2in dia. Tup, 3in dia. Ring, -22°F: 194 in-lb3
Elongation at Break, ASTM D638, 73°F: >400%
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Bexloy® W 501 NC, Bexloy W 501 NC, Bexloy® , Bexloy, BexloyW501NC, W 501 NC, W501, 501NC, W501NC, Ionomer, DuPont P&IP, 501W
Features
Features may also be described by the following terms: High Impact Resistance, Scratch Resistant, Resists Scratches.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Suggested Max Moisture
%
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Rate
 
  
Back Pressure
psi
  
Notes
1Typical properties: these are not to be construed as specifications.
2Die C
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.