IDES Prospector Already have an account? Login Here

IDES

Capran® 1200M

Polyamide 6

Supplied by Honeywell

The technical datasheet with complete property values for Capran® 1200M is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
CAPRAN® 1200M is a 0.47 mil (12 micron) biaxially oriented nylon 6 film with a polymeric coating which provides enhanced adhesion to a variety of inks, coatings, and adhesives. Metallization adhesion is excellent when using "M" coated products.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Good Adhesion
Uses 
  • Bi-axially Oriented Film
Forms 
  • Film
Mechanical
Nominal Value
Unit
Test Method
Coefficient of Friction
     ASTM D1894
vs. Itself - Dynamic
 
  
vs. Metal - Dynamic
 
  
Films
Nominal Value
Unit
Test Method
Film Thickness - Tested
mil
  
Secant Modulus
     ASTM D882
MD: 0.47 mil
psi
  
TD: 0.47 mil
psi
  
Tensile Strength
     ASTM D882
MD: Break, 0.47 mil
psi
  
TD: Break, 0.47 mil
psi
  
Tensile Elongation
     ASTM D882
MD: Break, 0.47 mil
%
  
TD: Break, 0.47 mil
%
  
Oxygen Permeability (77°F, 0.47 mil)
cm³·mil/100in²/atm/24 hr
 ASTM D3985
Water Vapor Transmission Rate (100°F, 0.47 mil, 100% RH)
g·mil/100in²/atm/24 hr
 ASTM F1249
Optical
Nominal Value
Unit
Test Method
Gloss (20°, 0.470 mil)
 
 ASTM D2457
Haze (0.470 mil)
%
 ASTM D1003
Additional Information
Yield: 51000 in²/lb
Tensile Strength @ Break, ASTM D 882, MD & TD: 34000 to 42000 psi
Elongation @ Break, ASTM 882, MD & TD: 65 to 90%
Secant Modulus, ASTM D 882, MD & TD: 350000 to 450000 psi
Graves Tear (initial), ASTM D1004, MD & TD: 1100 to 1500 g/mil
Coefficient of Friction, ASTM D 1894: 0.60 to 0.90 vs Itself-Dynamic
Coefficient of Friction, ASTM D 1894: 0.18 to 0.27 vs Metal-Dynamic
Oxygen Permeability, ASTM D 3985: 3.5 to 4.5 cc/100 in²/day
Water Vapor Transmission, ASTM F 1249: 23 to 26 g/100 in²/day
Surface Tension, ASTM 2578, minimum, treated side: >/= 56 dynes/cm
Surface Tension, ASTM 2578, Minimum, untreated side: >/= 50 dynes/cm
Dimensional Stability, ASTM D1204, 320°F, 5 mins, MD: 1.5 to 2.5% shrinkage
Dimensional Stability, ASTM D1204, 320°F, 5 mins, TD: 0.2 to 0.7% shrinkage
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Capran® 1200M, Capran 1200M, Capran® , Capran, Capran1200M, 1200 M, 1200M, Polyamide 6, Nylon 6, Polyamide, Nylon, pa6, Honeywell, Polyamide6, Nylon6, M1200
Generic Name
Generic Name may also be described by the following terms: PA6.
Features
Features may also be described by the following terms: Good Adhesion.
Uses
Uses may also be described by the following terms: Bi-axially Oriented Film, Biaxially Oriented Film.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.