IDES Prospector Already have an account? Login Here

IDES

PermaStat® 1200-70A

Thermoplastic Polyurethane Elastomer

Supplied by RTP Company

The technical datasheet with complete property values for PermaStat® 1200-70A is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Warning: The status of this material is 'Commercial: Limited Issue'

The data for this material has not been recently verified.
Please contact RTP Company for current information prior to specifying this grade.
General  
Material Status 
  • Limited Issue
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
  • South America
Features 
  • Antistatic
  • ESD Protection
  
RoHS Compliance 
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Elastomers
Nominal Value
Unit
Test Method
Tensile Strength (Yield)
psi
 ASTM D412
Tensile Elongation (Break)
%
 ASTM D412
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore A, 10 sec)
 
 ASTM D2240
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohm
 ASTM D257
Volume Resistivity
ohm·cm
 ASTM D257
Additional Information
Dew Point: 0°F
Static Decay, FTMS101C 4046.1, MIL-PRF-81705D, 5kV to 50 V, 12% RH: <2 sec
Surface Resistance, ESD S11.11: 1E09 to 9.9E10 ohm
Surface Resistivity, ASTM D257: 1E10 to 9.9E11 ohm/sq
Volume Resistivity, ASTM D257: 1E09 to 9.9E10 ohm-cm
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: PermaStat® 1200-70A, PermaStat 120070A, PermaStat® , PermaStat, PermaStat120070A, 1200, 1200 70 A, 1200-70A, 120070A, 1200:70A, 1200/70A, 1200+70A, 1200_70A, 1200 70A, 120070, 70A, Thermoplastic Polyurethane Elastomer, Unspecified, Thermoplastic Polyurethane Elastomer Unspecified, TPU, Unspecified, TPU Unspecified, Thermoplastic Polyurethane, TPU, RTP, ThermoplasticPolyurethaneElastomerUnspecified, TPUUnspecified, ThermoplasticPolyurethane, 701200
Features
Features may also be described by the following terms: Electrostatic Discharge Protection, ESD Protection.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Pressure
psi
  
Injection Notes
Desiccant Type Dryer Required.
Do not exceed 520 °F (270 °C) melt temperature.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.