Already have an account?
Login Here
IDES
PermaStat® 300
Polycarbonate
Supplied by RTP Company
The technical datasheet with complete property values for PermaStat® 300 is available to members of the
Prospector Plastics Database
.
Register to view full datasheet
.
Register to View Full Datasheet
General
Material Status
Commercial: Active
Availability
Africa & Middle East
Asia Pacific
Europe
Latin America
North America
South America
Additive
Antistatic
Features
Antistatic
ESD Protection
RoHS Compliance
Processing Method
Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
ASTM D792
Molding Shrinkage - Flow
(0.125 in)
in/in
ASTM D955
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
ASTM D638
Tensile Strength
psi
ASTM D638
Tensile Elongation
(Yield)
%
ASTM D638
Flexural Modulus
psi
ASTM D790
Flexural Strength
psi
ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
(0.125 in)
ft·lb/in
ASTM D256
Unnotched Izod Impact
(0.125 in)
ASTM D4812
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
ASTM D648
66 psi, Unannealed
°F
264 psi, Unannealed
°F
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
2
ohms
ASTM D257
Volume Resistivity
ohm·cm
ASTM D257
Static Decay
3
FTMS 101C 4046.1
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
(0.0591 in)
UL 94
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: PermaStat® 300, PermaStat 300, PermaStat® , PermaStat, PermaStat300, 300, Polycarbonate, PC, RTP
Features
Features may also be described by the following terms: Electrostatic Discharge Protection, ESD Protection.
Injection
Nominal Value
Unit
Drying Temperature - Desiccant Dryer
°F
Drying Time - Desiccant Dryer
hr
Dew Point - Desiccant Dryer
°F
Suggested Max Moisture
%
Processing (Melt) Temp
°F
Mold Temperature
°F
Injection Pressure
psi
Injection Notes
Desiccant Type Dryer Required.
Do not exceed 520 °F (270 °C) melt temperature.
Notes
1
Typical properties: these are not to be construed as specifications.
2
ESD STM11.11
3
MIL-PRF-81705D, 5kV to 50 V, 12% Rh
Copyright © 2012
IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.