IDES Prospector Already have an account? Login Here

IDES

VALOX* 365 Resin

Polyethylene Terephthalate

Supplied by SABIC Innovative Plastics

The technical datasheet with complete property values for VALOX* 365 Resin is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Unreinforced, opaque, provides chemical resistance and dimensional stability, UL94V-0 rated at 0.031".
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Good Chemical Resistance
  • Good Dimensional Stability
  
Appearance 
  • Opaque
Processing Method 
  • Injection Molding
Multi-Point Data 
  • Thermal Conductivity vs. Temperature (ASTM E1530)
  • Viscosity vs. Shear Rate (ASTM D3835)
  
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Specific Volume
in³/lb
 ASTM D792
Molding Shrinkage
     Internal Method
Flow  2
in/in
  
Flow  3
in/in
  
Across Flow  2
in/in
  
Across Flow  3
in/in
  
Water Absorption
     ASTM D570
24 hr
%
  
Equilibrium, 73°F
%
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 4
     ASTM D638
Yield
psi
  
Break
psi
  
Tensile Elongation 4 (Break)
%
 ASTM D638
Flexural Modulus 5 (1.97 in Span)
psi
 ASTM D790
Flexural Strength 5
     ASTM D790
Yield, 1.97 in Span
psi
  
Break, 1.97 in Span
psi
  
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
     ASTM D256
-40°F
ft·lb/in
  
-22°F
ft·lb/in
  
73°F
ft·lb/in
  
Gardner Impact
     ASTM D3029
73°F
in·lb
  
73°F 6
in·lb
  
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
 ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     ASTM D648
66 psi, Unannealed, 0.252 in
°F
  
264 psi, Unannealed, 0.252 in
°F
  
CLTE - Flow
     ASTM E831
-40 to 104°F
in/in/°F
  
-40 to 203°F
in/in/°F
  
140 to 280°F
in/in/°F
  
Electrical
Nominal Value
Unit
Test Method
Dielectric Strength (0.126 in, in Oil)
V/mil
 ASTM D149
Dielectric Constant
     ASTM D150
100 Hz
 
  
1 MHz
 
  
Dissipation Factor
     ASTM D150
100 Hz
 
  
1 MHz
 
  
Arc Resistance (PLC) 7
 
 ASTM D495
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
     UL 94
0.0300 in
 
  
0.0870 in
 
  
Oxygen Index
%
 ASTM D2863
UL
Nominal Value
Unit
Test Method
RTI Str
°F
 UL 746
RTI Imp
°F
 UL 746
RTI Elec
°F
 UL 746
Comparative Tracking Index (CTI) (PLC)
 
 UL 746
High Voltage Arc Tracking Rate (HVTR) (PLC)
 
 UL 746
Hot-wire Ignition (HWI) (PLC)
 
 UL 746
High Amp Arc Ignition (HAI) (PLC)
 
 UL 746
Outdoor Suitability
 
 UL 746C
Related Terminology
This supplier and product may also be known by these terms: GE Plastics, LNP Engineering Plastics, GE Polymerland

Product names can be difficult to match. You may have searched any one of these terms to find this product: VALOX* 365 Resin, VALOX 365 Resin, VALOX* , VALOX, VALOX365Resin, 365 Resin, 365Resin, Polyethylene Terephthalate, PET, Polyester, SABIC IP, PolyethyleneTerephthalate, Resin365
Features
Features may also be described by the following terms: Good Dimensional Stability, Dimensionally Stable, Good Chemical Resistance, Chemical Resistant.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Drying Time, Maximum
hr
  
Suggested Max Moisture
%
  
Suggested Shot Size
%
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Back Pressure
psi
  
Screw Speed
rpm
  
Vent Depth
in
  
Notes
1Typical properties: these are not to be construed as specifications.
20.75 to 2.3 mm
32.3 to 4.6 mm
4Type I, 2.0 in/min
50.051 in/min
6Modified
7Tungsten Electrode
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.