IDES Prospector Already have an account? Login Here

IDES

EVAL® G156B

Ethylene Vinyl Alcohol

Supplied by Eval Company of America

The technical datasheet with complete property values for EVAL® G156B is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Copolymer
  • Food Contact Acceptable
  • Low Gas Permeability
  • Low to No Odor
  
Uses 
  • Food Packaging
Agency Ratings 
 
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238
Films
Nominal Value
Unit
Test Method
Tensile Strength - MD (Break)
psi
 ASTM D882
Tensile Elongation - MD (Break)
%
 ASTM D882
Oxygen Permeability (68°F, 68% RH)
cm³·mil/100in²/atm/24 hr
 ASTM D3985
Water Vapor Transmission
g/100 in²/24 hr
 ASTM E96
Thermal
Nominal Value
Unit
Test Method
Glass Transition Temperature
°F
 ASTM E1356
Melting Temperature
°F
 DSC
Optical
Nominal Value
Unit
Test Method
Gloss (45°)
 
 ASTM D2457
Haze
%
 ASTM D1003
Additional Information
Carbon Dioxide Permeability, ASTM D-1434, 65% RH, 68°F: 0.32 cc.mil/100in2/24/hrs./atm
Crystallization Temperature, DSC: 276.8°F
Melt Flow Rate, ASTM D1283, 210°C/2.16kg: 14.7g/10min

High yield, and biaxial orientation
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: EVAL® G156B, EVAL G156B, EVAL® , EVAL, EVALG156B, G 156 B, G156B, G156, 156B, Ethylene Vinyl Alcohol, EVOH, Vinyl Alcohol, VOH, EthyleneVinylAlcohol, VinylAlcohol, 156G
Features
Features may also be described by the following terms: Low Gas Permeability, Low Odor.
Uses
Uses may also be described by the following terms: Food Packaging.
Agency Ratings
This plastic material has 2 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (2).
Extrusion
Nominal Value
Unit
 
Cylinder Zone 1 Temp.
°F
  
Cylinder Zone 2 Temp.
°F
  
Cylinder Zone 3 Temp.
°F
  
Cylinder Zone 4 Temp.
°F
  
Cylinder Zone 5 Temp.
°F
  
Adapter Temperature
°F
  
Melt Temperature
°F
  
Die Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.