IDES Prospector Already have an account? Login Here

IDES

Hylon® N1033TL

Polyamide 66

Glass Fiber Reinforcement, 33%

Supplied by Ravago Manufacturing Americas, LLC

The technical datasheet with complete property values for Hylon® N1033TL is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 33% Filler by Weight
Additive 
  • Lubricant
Features 
  • Good Toughness
  • Lubricated
  
RoHS Compliance 
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Dry
Conditioned
Unit
Test Method
Specific Gravity
        
--
--
 
 ASTM D792
--
--
g/cm³
 ISO 1183
Molding Shrinkage - Flow
        
--
--
in/in
 ASTM D955
--
--
%
 ISO 294-4
Water Absorption (24 hr)
--
%
 ASTM D570
Mechanical
Dry
Conditioned
Unit
Test Method
Tensile Strength
        
Yield, 73°F
psi
 ASTM D638
Yield, 73°F
--
psi
 ISO 527-2
Tensile Elongation
        
Break, 73°F
--
%
 ASTM D638
Break, 73°F
--
%
 ISO 527-2
Flexural Modulus
        
73°F
psi
 ASTM D790
73°F
--
psi
 ISO 178
Flexural Strength
        
73°F
psi
 ASTM D790
73°F
--
psi
 ISO 178
Impact
Dry
Conditioned
Unit
Test Method
Notched Izod Impact
        
73°F
ft·lb/in
 ASTM D256
73°F
--
ft·lb/in²
 ISO 180
Hardness
Dry
Conditioned
Unit
Test Method
Rockwell Hardness (M-Scale)
 
 ASTM D785
Thermal
Dry
Conditioned
Unit
Test Method
Deflection Temperature Under Load
        
264 psi, Unannealed
--
°F
 ASTM D648
264 psi, Unannealed
--
°F
 ISO 75-2/A
CLTE - Flow
--
in/in/°F
 ASTM D696
Electrical
Dry
Conditioned
Unit
Test Method
Volume Resistivity
--
ohm·cm
 ASTM D257
Dielectric Strength 2
--
V/mil
 ASTM D149
Flammability
Dry
Conditioned
Unit
Test Method
Flame Rating - UL
       UL 94
0.0590 in
--
 
  
0.0591 in, BK
--
 
  
0.118 in, BK
--
 
  
Related Terminology
Dry
Product names can be difficult to match. You may have searched any one of these terms to find this product: Hylon® N1033TL, Hylon N1033TL, Hylon® , Hylon, HylonN1033TL, N 1033 TL, N1033TL, N1033, 1033TL, Polyamide 66, Nylon 66, Polyamide, Nylon, pa66, Ravago Americas, Polyamide66, Nylon66, 1033N
Generic Name
Dry
Generic Name may also be described by the following terms: PA66.
Conditioned
Generic Name may also be described by the following terms: PA66.
Features
Dry
Features may also be described by the following terms: Good Toughness, Tough.
Conditioned
Product names can be difficult to match. You may have searched any one of these terms to find this product: Hylon® N1033TL, Hylon N1033TL, Hylon® , Hylon, HylonN1033TL, N 1033 TL, N1033TL, N1033, 1033TL, Polyamide 66, Nylon 66, Polyamide, Nylon, pa66, Ravago Americas, Polyamide66, Nylon66, 1033N
Injection
Dry
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Back Pressure
psi
  
Screw Speed
rpm
  
Notes
1Typical properties: these are not to be construed as specifications.
2Method A (Short-Time)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.