Leona™ 1300S Asahi Kasei Polyamide 66

General

Material Status

Commercial: Active

Availability

Africa & Middle East

Asia Pacific

Europe

North America

Processing Method

Injection Molding

Physical	Dry	Conditioned	Unit	Test Method
Specific Gravity
--		--		ASTM D792
--		--	g/cm³	ISO 1183
Molding Shrinkage - Flow		--	%	Internal Method
Water Absorption
Equilibrium	--		%	ASTM D570
Equilibrium, 73°F, 50% RH	--		%	ISO 62
Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Modulus (73°F)			psi	ISO 527-2
Tensile Stress
Yield, 73°F			psi	ISO 527-2
--			psi	ASTM D638
Tensile Strain
Yield, 73°F			%	ISO 527-2
Break			%	ASTM D638
Break, 73°F	--		%	ISO 527-2
Flexural Modulus
--			psi	ASTM D790
73°F			psi	ISO 178
Flexural Strength
--			psi	ASTM D790
73°F			psi	ISO 178
Taber Abrasion Resistance	--		mg	ASTM D1044
Impact	Dry	Conditioned	Unit	Test Method
Charpy Notched Impact Strength			ft·lb/in²	ISO 179
Charpy Unnotched Impact Strength				ISO 179
Notched Izod Impact			ft·lb/in	ASTM D256
Hardness	Dry	Conditioned	Unit	Test Method
Rockwell Hardness				ASTM D785, ISO 2039-2
M-Scale
R-Scale
Thermal	Dry	Conditioned	Unit	Test Method
Deflection Temperature Under Load
66 psi, Unannealed		--	°F	ASTM D648
66 psi, Unannealed		--	°F	ISO 75-2/B
264 psi, Unannealed		--	°F	ASTM D648
264 psi, Unannealed		--	°F	ISO 75-2/A
CLTE - Flow		--	in/in/°F	ASTM D696, ISO 11359-2
Specific Heat		--	Btu/lb/°F
Thermal Conductivity		--	Btu·in/hr/ft²/°F
Electrical	Dry	Conditioned	Unit	Test Method
Surface Resistivity		--	ohm	IEC 60093
Volume Resistivity (73°F)		--	ohm·cm	IEC 60093
Comparative Tracking Index (0.118 in)		--	V	IEC 60112
Electric Strength		--	V/mil	IEC 60243-1
Flammability	Dry	Conditioned	Unit	Test Method
Flame Rating - UL				UL 94
0.0313 in		--
0.0625 in		--
Related Terminology
Dry	This supplier and product may also be known by these terms: Thermofil, Asahi Thermofil Product names can be difficult to match. You may have searched any one of these terms to find this product: Leona™ 1300S, Leona 1300S, Leona™ , Leona, Leona1300S, 1300 S, 1300S, Polyamide 66, Nylon 66, Polyamide, Nylon, pa66, Asahi Kasei, Polyamide66, Nylon66, S1300
Generic Name
Dry	Generic Name may also be described by the following terms: PA66.
Conditioned	This supplier and product may also be known by these terms: Thermofil, Asahi Thermofil Product names can be difficult to match. You may have searched any one of these terms to find this product: Leona™ 1300S, Leona 1300S, Leona™ , Leona, Leona1300S, 1300 S, 1300S, Polyamide 66, Nylon 66, Polyamide, Nylon, pa66, Asahi Kasei, Polyamide66, Nylon66, S1300 Generic Name may also be described by the following terms: PA66.

Injection	Dry	Unit
Drying Temperature		°F
Drying Time		hr
Processing (Melt) Temp		°F
Mold Temperature		°F

Notes

¹Typical properties: these are not to be construed as specifications.

Leona™ 1300S

Polyamide 66

Supplied by Asahi Kasei Chemicals Corporation