IDES Prospector Already have an account? Login Here

IDES

Leona™ FG173

Polyamide 66

Supplied by Asahi Kasei Chemicals Corporation

The technical datasheet with complete property values for Leona™ FG173 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • North America
 
Additive 
  • Flame Retardant
  • Heat Stabilizer
 
Features 
  • Flame Retardant
Processing Method 
  • Injection Molding
Physical
Dry
Conditioned
Unit
Test Method
Specific Gravity
       
--
--
 
ASTM D792
--
--
g/cm³
ISO 1183
Molding Shrinkage
      Internal Method
Across Flow
--
%
 
Flow
--
%
 
Water Absorption
       
Equilibrium
--
%
ASTM D570
Equilibrium, 73°F, 50% RH
--
%
ISO 62
Mechanical
Dry
Conditioned
Unit
Test Method
Tensile Modulus (73°F)
psi
ISO 527-2
Tensile Stress
       
Break, 73°F
psi
ISO 527-2
--
psi
ASTM D638
Tensile Elongation
       
Break
%
ASTM D638
Break, 73°F
%
ISO 527-2
Flexural Modulus
       
--
psi
ASTM D790
73°F
psi
ISO 178
Flexural Strength
       
--
psi
ASTM D790
73°F
psi
ISO 178
Taber Abrasion Resistance
--
mg
ASTM D1044
Impact
Dry
Conditioned
Unit
Test Method
Charpy Notched Impact Strength
ft·lb/in²
ISO 179
Charpy Unnotched Impact Strength
ft·lb/in²
ISO 179
Notched Izod Impact
ft·lb/in
ASTM D256
Hardness
Dry
Conditioned
Unit
Test Method
Rockwell Hardness (M-Scale)
 
ASTM D785, ISO 2039-2
Thermal
Dry
Conditioned
Unit
Test Method
Deflection Temperature Under Load
       
66 psi, Unannealed
--
°F
ASTM D648
264 psi, Unannealed
--
°F
ASTM D648
264 psi, Unannealed
--
°F
ISO 75-2/A
CLTE - Flow
--
in/in/°F
ASTM D696, ISO 11359-2
Electrical
Dry
Conditioned
Unit
Test Method
Surface Resistivity
--
ohm
IEC 60093
Volume Resistivity (73°F)
--
ohm·cm
IEC 60093
Comparative Tracking Index (0.118 in)
--
V
IEC 60112
Electric Strength
--
V/mil
IEC 60243-1
Flammability
Dry
Conditioned
Unit
Test Method
Flame Rating - UL
      UL 94
0.0313 in
--
 
 
0.0625 in
--
 
 
Related Terminology
Dry
This supplier and product may also be known by these terms: Thermofil, Asahi Thermofil

Product names can be difficult to match. You may have searched any one of these terms to find this product: Leona™ FG173, Leona FG173, Leona™ , Leona, LeonaFG173, FG 173, FG173, Polyamide 66, Nylon 66, Polyamide, Nylon, pa66, Asahi Kasei, Polyamide66, Nylon66, 173FG
Generic Name
Dry
Generic Name may also be described by the following terms: PA66.
Conditioned
This supplier and product may also be known by these terms: Thermofil, Asahi Thermofil

Product names can be difficult to match. You may have searched any one of these terms to find this product: Leona™ FG173, Leona FG173, Leona™ , Leona, LeonaFG173, FG 173, FG173, Polyamide 66, Nylon 66, Polyamide, Nylon, pa66, Asahi Kasei, Polyamide66, Nylon66, 173FG

Generic Name may also be described by the following terms: PA66.
Injection
Dry
Unit
 
Drying Temperature
°F
 
Drying Time
hr
 
Processing (Melt) Temp
°F
 
Mold Temperature
°F
 
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.