IDES Prospector Already have an account? Login Here

IDES

MAGNUM™ 8434

ABS Resin

Supplied by Styron LLC

The technical datasheet with complete property values for MAGNUM™ 8434 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
MAGNUM™ 8434 is a product which combines high gloss with medium-high heat performance. It is suitable for a wide range of applications. The mass (continuous process) ABS technology of Styron ensures an ABS resin that combines excellent processability with a stable light base colour that is ideal for self-colouring.

Applications:
  • Household appliances
  • Consumer goods
  • Toys
  • Automotive interior trim
  • Chrome
  • Electroplating
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  
Automotive Specifications 
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
      
--
g/cm³
 ISO 1183/B
--
lb/in³
 ISO 1183 2
Apparent Density
g/cm³
 ISO 60
Melt Mass-Flow Rate (MFR) (220°C/10.0 kg)
g/10 min
 ISO 1133
Melt Volume-Flow Rate (MVR) (220°C/10.0 kg)
in³/10min
 ISO 1133
Molding Shrinkage - Flow
%
 ISO 294-4
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
      
0.126 in, Injection Molded
psi
 ISO 527-2
--
psi
 ISO 527-2 2
Tensile Stress
      
Yield, 0.126 in, Injection Molded
psi
 ISO 527-2/50
Yield, 0.126 in, Injection Molded
psi
 ISO 527-2/100
Yield
psi
 ISO 527-2 2
Tensile Strain (Yield, 0.126 in, Injection Molded)
%
 ISO 527-2/50, ISO 527-2/100
Nominal strain at break
%
 ISO 527-2 2
Flexural Modulus 3, 4 (0.126 in, Injection Molded)
psi
 ISO 178
Flexural Strength 3, 4 (0.126 in, Injection Molded)
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
      
-22°F, Injection Molded
ft·lb/in²
 ISO 179/1eA
-22°F, Injection Molded
ft·lb/in²
 ISO 179/2C
73°F, Injection Molded
ft·lb/in²
 ISO 179/2C
73°F, Injection Molded
ft·lb/in²
 ISO 179/1eA
Charpy impact strength
     ISO 179/1eU 2
-22°F
 
  
73°F
 
  
Notched Izod Impact Strength
     ISO 180/A
-22°F, Injection Molded
ft·lb/in²
  
73°F, Injection Molded
ft·lb/in²
  
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
      
264 psi, Annealed
°F
 ISO 75-2/A
264 psi
°F
 ISO 75-2 2
Vicat Softening Temperature
      
--
°F
 ISO 306/B50
50°C/h, B (50N)
°F
 ISO 306 2
Electrical
Nominal Value
Unit
Test Method
Volume resistivity
ohm·in
 IEC 60093 2
Flammability
Nominal Value
Unit
Test Method
Burning Rate 5 (0.0787 in)
in/min
 ISO 3795
Flame Rating - UL 5
     UL 94
0.0591 in
 
  
0.118 in
 
  
Burning Behav. at 1.6mm nom. thickn. (0.06 in, UL)
 
 ISO 1210 2
Carbon Emission 5
µg/g
 VDA 277
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: MAGNUM™ 8434, MAGNUM 8434, MAGNUM™ , MAGNUM, MAGNUM8434, 8434, Acrylonitrile Butadiene Styrene, ABS, Styron, AcrylonitrileButadieneStyrene
Automotive Specifications
This plastic material has approval for 1 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): OPEL (1).
Notes
1Typical properties: these are not to be construed as specifications.
2Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
30.079 in/min
43-points
5This rating not intended to reflect hazards presented by this or any other material under actual fire conditions.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.