IDES Prospector Already have an account? Login Here

IDES

Geon™ Vinyl Cellular E2500

Rigid Polyvinyl Chloride

Supplied by PolyOne Corporation

The technical datasheet with complete property values for Geon™ Vinyl Cellular E2500 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Physical properties were measured on non-foamed profiles
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • North America
  • South America
Uses 
  • Building Materials
  • Outdoor Applications
  
Forms 
  • Cellular, Inward Foam
  • Powder
  
Processing Method 
  • Extrusion
Physical
Nominal Value
Unit
Test Method
Specific Gravity 2
 
 ASTM D792
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus 3
psi
 ASTM D638
Tensile Strength 3 (Yield)
psi
 ASTM D638
Flexural Modulus
psi
 ASTM D790
Flexural Strength
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact - Across Flow (73°F, 0.125 in, Compression Molded)
ft·lb/in
 ASTM D256A
Drop Impact Resistance
     ASTM D4226
73°F 4
in·lb/mil
  
73°F 5
in·lb/mil
  
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Unannealed, 0.125 in)
°F
 ASTM D648
CLTE - Flow
in/in/°F
 ASTM D696
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Geon™ Vinyl Cellular E2500, Geon Vinyl Cellular E2500, Geon™ Vinyl Cellular , Geon Vinyl Cellular, GeonVinylCellularE2500, GeonVinylCellular, CellularE 2500, CellularE2500, Cellular, E 2500, E2500, Polyvinyl Chloride, Rigid, Polyvinyl Chloride Rigid, PVC, Rigid, PVC Rigid, Polyvinyl Chloride, PVC, PolyOne, PolyvinylChlorideRigid, PVCRigid, PolyvinylChloride, 2500E, 2500CellularE
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
2Cellular
3Type I, 0.20 in/min
4Procedure A, C.125 Dart
5Procedure B, C.125 Dart
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.