Cevian -PS R60HF PlastxWorld Polystyrene, High Impact

General

Material Status

Availability

Features

Appearance

Forms

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (220°C/5.0 kg)		g/10 min	ISO 1133
Molding Shrinkage		%	ISO 294-4
Mechanical	Nominal Value	Unit	Test Method
Tensile Stress (Yield)		psi	ISO 527-2
Flexural Modulus		psi	ISO 178
Flexural Strength		psi	ISO 178
Impact	Nominal Value	Unit	Test Method
Notched Izod Impact Strength (73°F)		ft·lb/in²	ISO 180
Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness (L-Scale)			ISO 2039-2
Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature
--		°F	ISO 306/A50
--		°F	ISO 306/B50
--		°F	ISO 306/B120
Flammability	Nominal Value	Unit	Test Method
Flame Rating - UL (0.0630 in)			UL 94
Additional Information
The value listed as Mold Shrinkage, ISO 294, was tested in accordance with ISO 2577.
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Cevian®-PS R60HF, CevianPS R60HF, Cevian®-PS , CevianPS, Cevian®:PS, Cevian®/PS, Cevian®+PS, Cevian®_PS, Cevian® PS, CevianPSR60HF, Cevian_PS, Cevian PS, R 60 HF, R60HF, R60, 60HF, PS, Polystyrene, High Impact, Polystyrene High Impact, PS (HIPS), PS HIPS, Polystyrene, PlastxWorld, PolystyreneHighImpact, PSHIPS, 60R
Features
Features may also be described by the following terms: High Impact Resistance, High Flow, High Melt, High MFI.

Notes

¹Typical properties: these are not to be construed as specifications.

Cevian®-PS R60HF