Sebimid 6 6 TG6 Sebi Polyamide 6 (Glass Fiber Reinforcement, 30%)

General

Material Status

Availability

Filler / Reinforcement

Features

Forms

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ASTM D1505
Molding Shrinkage - Flow		in/in	ASTM D955
Water Absorption			ASTM D570
24 hr		%
Saturation		%
Mechanical	Nominal Value	Unit	Test Method
Tensile Strength		psi	ASTM D638
Tensile Elongation (Break)		%	ASTM D638
Flexural Modulus		psi	ASTM D790
Flexural Strength		psi	ASTM D790
Impact	Nominal Value	Unit	Test Method
Notched Izod Impact		ft·lb/in	ASTM D256
Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load			ASTM D648
66 psi, Unannealed		°F
264 psi, Unannealed		°F
Vicat Softening Temperature
--		°F	ASTM D1525²
--		°F	ASTM D1525³
Melting Temperature		°F
Flammability	Nominal Value	Unit	Test Method
Flame Rating - UL			UL 94
0.0315 in
0.0630 in
0.126 in
UL	Nominal Value	Unit	Test Method
Comparative Tracking Index (CTI)		V	UL 746
Additional Information
Density, ASTM D 792: 1.32-1.34. Water Absorption 24h, ASTM D 570: 0.8-1.0%. The value listed as C.T.I., UL 746: >600, was tested in accordance with CEI 112. GWI, 850°C 1.6 mm, NO.
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Sebimid 6 6 TG6, Sebimid 6 , Sebimid66TG6, Sebimid6, 66 TG 6, 66 TG6, 66TG, 6 TG 6, 66TG6, 6 TG6, 6TG, TG6, 6TG6, Polyamide 6, Nylon 6, Polyamide, Nylon, pa6, Sebi, Polyamide6, Nylon6, TG66
Generic Name
Generic Name may also be described by the following terms: PA6.
Features
Features may also be described by the following terms: Good Toughness, Tough.

Notes

¹Typical properties: these are not to be construed as specifications.

²Rate A (50°C/h)

³Rate B (120°C/h)

Sebimid 6 6 TG6