Sebimid 66 VOP G5 HSM black Sebi Polyamide 6 (Glass Fiber Reinforcement, 25%)

General

Material Status

Availability

Filler / Reinforcement

Features

Forms

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ASTM D1505
Molding Shrinkage - Flow		in/in	ASTM D955
Water Absorption			ASTM D570
24 hr		%
Saturation		%
Mechanical	Nominal Value	Unit	Test Method
Tensile Strength		psi	ASTM D638
Tensile Elongation (Break)		%	ASTM D638
Flexural Modulus		psi	ASTM D790
Flexural Strength		psi	ASTM D790
Impact	Nominal Value	Unit	Test Method
Notched Izod Impact		ft·lb/in	ASTM D256
Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load			ASTM D648
66 psi, Unannealed		°F
264 psi, Unannealed		°F
Vicat Softening Temperature
--		°F	ASTM D1525²
--		°F	ASTM D1525³
Melting Temperature		°F
Flammability	Nominal Value	Unit	Test Method
Flame Rating - UL			UL 94
0.0630 in
0.126 in
UL	Nominal Value	Unit	Test Method
Comparative Tracking Index (CTI)		V	UL 746
Additional Information
Water Absorption 24h, ASTM D 570: 0.5-0.6%. The value listed as C.T.I., UL 746: >500, was tested in accordance with CEI 112. GWI, 850°C 1.6 mm, 960
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Sebimid 66 VOP G5 HSM black, Sebimid 66 , Sebimid66VOPG5HSMblack, Sebimid66, 66 VOP G 5 HSM black, 66VOP G5 HSM black, 66VOP, 66, VOP G 5 HSM black, 66VOPG5HSMblack, VOP G5 HSM black, VOPG, G5, 5HSM, HSMblack, VOPG5HSMblack, Polyamide 6, Nylon 6, Polyamide, Nylon, pa6, Sebi, Polyamide6, Nylon6, GVOP, VOP66
Generic Name
Generic Name may also be described by the following terms: PA6.

Notes

¹Typical properties: these are not to be construed as specifications.

²Rate A (50°C/h)

³Rate B (120°C/h)

Sebimid 66 VOP G5 HSM black