IDES Prospector Already have an account? Login Here

IDES

Sebimid 66 66 L03 G4 HS

Polyamide 6

Glass Fabric Reinforcement, 20%

Supplied by Sebi Innovative Compounds

The technical datasheet with complete property values for Sebimid 66 66 L03 G4 HS is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
  
Filler / Reinforcement 
  • Glass Fabric Reinforcement, 20% Filler by Weight
Additive 
  • Heat Stabilizer
  • Molybdenum Disulfide Lubricant
  • PTFE Lubricant
Features 
  • Heat Stabilized
  • Lubricated
  • Self Lubricating
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Molding Shrinkage - Flow
in/in
 ASTM D955
Water Absorption
     ASTM D570
24 hr
%
  
Saturation
%
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength
psi
 ASTM D638
Tensile Elongation (Break)
%
 ASTM D638
Flexural Modulus
psi
 ASTM D790
Flexural Strength
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
ft·lb/in
 ASTM D256
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     ASTM D648
66 psi, Unannealed
°F
  
264 psi, Unannealed
°F
  
Vicat Softening Temperature
°F
 ASTM D1525 2
Melting Temperature
°F
  
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
     UL 94
0.0315 in
 
  
0.0630 in
 
  
0.126 in
 
  
UL
Nominal Value
Unit
Test Method
Comparative Tracking Index (CTI)
V
 UL 746
Additional Information
Density, ASTM D 792: 1.38-1.40.
Water Absorption 24h, ASTM D 570: 0.7-0.9%.
The value listed as C.T.I., UL 746: >550, was tested in accordance with CEI 112.
GWI, 850°C 1.6 mm, NO.
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Sebimid 66 66 L03 G4 HS, Sebimid 66 , Sebimid6666L03G4HS, Sebimid66, 6666 L 03 G 4 HS, 6666 L03 G4 HS, 6666L, 66, 66 L 03 G 4 HS, 6666L03G4HS, 66 L03 G4 HS, 66L, L03, 03G, G4, 4HS, 66L03G4HS, Polyamide 6, Nylon 6, Polyamide, Nylon, pa6, Sebi, Polyamide6, Nylon6, L66, L6666
Generic Name
Generic Name may also be described by the following terms: PA6.
Features
Features may also be described by the following terms: Self-Lubricating, Self Lubricating, Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized.
Notes
1Typical properties: these are not to be construed as specifications.
2Rate A (50°C/h)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.