IDES Prospector Already have an account? Login Here

IDES

CYCOLOY* C1000HF Resin

Acrylonitrile Butadiene Styrene + PC

Supplied by SABIC Innovative Plastics Asia Pacific

The technical datasheet with complete property values for CYCOLOY* C1000HF Resin is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
High flow PC+ABS.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Features 
  • High Flow
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR)
     ASTM D1238
230°C/3.8 kg
g/10 min
  
260°C/5.0 kg
g/10 min
  
Molding Shrinkage
     Internal Method
Flow: 0.126 in
in/in
  
Across Flow: 0.126 in
in/in
  
Water Absorption
     ASTM D570
24 hr
%
  
Equilibrium, 73°F
%
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus 2
psi
 ASTM D638
Tensile Strength 3 (Yield)
psi
 ASTM D638
Tensile Elongation 3
     ASTM D638
Yield
%
  
Break
%
  
Flexural Modulus 4 (1.97 in Span)
psi
 ASTM D790
Flexural Strength 4 (Yield, 1.97 in Span)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
     ASTM D256
-22°F
ft·lb/in
  
73°F
ft·lb/in
  
Instrumented Dart Impact
     ASTM D3763
-22°F, Total Energy
in·lb
  
73°F, Total Energy
in·lb
  
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     ASTM D648
66 psi, Unannealed, 0.126 in
°F
  
264 psi, Unannealed, 0.126 in
°F
  
CLTE - Flow (-40 to 104°F)
in/in/°F
 ASTM E831
Thermal Conductivity
Btu·in/hr/ft²/°F
 ASTM C177
Related Terminology
This supplier and product may also be known by these terms: GE Plastics, LNP Engineering Plastics, Cycloy

Product names can be difficult to match. You may have searched any one of these terms to find this product: CYCOLOY* C1000HF Resin, CYCOLOY C1000HF Resin, CYCOLOY* , CYCOLOY, CYCOLOYC1000HFResin, C 1000 HF Resin, C1000HF Resin, C1000, 1000HF, HFResin, C1000HFResin, Acrylonitrile Butadiene Styrene + PC, Acrylonitrile Butadiene Styrene PC, Acrylonitrile Butadiene Styrene : PC, Acrylonitrile Butadiene Styrene / PC, Acrylonitrile Butadiene Styrene - PC, Acrylonitrile Butadiene Styrene _ PC, Acrylonitrile Butadiene Styrene PC, ABS+PC, ABSPC, ABS:PC, ABS/PC, ABS-PC, ABS_PC, ABS PC, Acrylonitrile Butadiene Styrene, ABS, SABIC IP Asia, AcrylonitrileButadieneStyrenePC, AcrylonitrileButadieneStyrene, AcrylonitrileButadieneStyrene_PC, 1000C
Features
Features may also be described by the following terms: High Flow, High Melt, High MFI.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Drying Time, Maximum
hr
  
Suggested Max Moisture
%
  
Suggested Shot Size
%
  
Hopper Temperature
°F
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Back Pressure
psi
  
Screw Speed
rpm
  
Vent Depth
in
  
Notes
1Typical properties: these are not to be construed as specifications.
22.0 in/min
3Type I, 2.0 in/min
40.051 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.