IDES Prospector Already have an account? Login Here

IDES

Chemlon® 100 L

Polyamide 66

Supplied by Teknor Apex Company (Chem Polymer)

The technical datasheet with complete property values for Chemlon® 100 L is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Additive 
  • Lubricant
Features 
  • General Purpose
  • Lubricated
  
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (235°C/1.0 kg)
g/10 min
 ASTM D1238
Molding Shrinkage - Flow
in/in
 ASTM D955
Water Absorption (24 hr)
%
 ASTM D570
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength
psi
 ASTM D638
Tensile Elongation
     ASTM D638
Yield
%
  
Break
%
  
Flexural Modulus
psi
 ASTM D790
Flexural Strength
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F)
ft·lb/in
 ASTM D256
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     ASTM D648
66 psi, Unannealed
°F
  
264 psi, Unannealed
°F
  
Melting Temperature
°F
 DSC
CLTE - Flow
in/in/°F
 ASTM D696
Electrical
Nominal Value
Unit
Test Method
Volume Resistivity
ohm·cm
 ASTM D257
Dielectric Strength (0.118 in)
V/mil
 ASTM D149
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0319 in)
 
 UL 94
Oxygen Index
%
 ASTM D2863
UL
Nominal Value
Unit
Test Method
RTI Str
     UL 746
0.0319 in
°F
  
0.0590 in
°F
  
0.118 in
°F
  
RTI Imp
     UL 746
0.0319 in
°F
  
0.0590 in
°F
  
0.118 in
°F
  
RTI Elec
     UL 746
0.0319 in
°F
  
0.0590 in
°F
  
0.118 in
°F
  
Comparative Tracking Index (CTI)
V
 UL 746
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Chemlon® 100 L, Chemlon 100 L, Chemlon® , Chemlon, Chemlon100L, 100 L, 100L, Polyamide 66, Nylon 66, Polyamide, Nylon, pa66, Teknor Apex Chem Poly, Polyamide66, Nylon66, L100
Generic Name
Generic Name may also be described by the following terms: PA66.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Suggested Max Moisture
%
  
Suggested Max Regrind
%
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Processing (Melt) Temp
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.