IDES Prospector Already have an account? Login Here

IDES

Electrafil® J-1/CF/10/TF/13/SI/2

Polyamide 66

Carbon Fiber Reinforcement, 10%

Supplied by Techmer Lehvoss Compounds

The technical datasheet with complete property values for Electrafil® J-1/CF/10/TF/13/SI/2 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • North America
  • South America
Filler / Reinforcement 
  • Carbon Fiber Reinforcement, 10% Filler by Weight
Additive 
  • PTFE Lubricant (130000 ppm)
  • Silicone Lubricant (20000 ppm)
  
Features 
  • Lubricated
RoHS Compliance 
Appearance 
  • Natural Color
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (73°F)
psi
 ASTM D638
Flexural Modulus (73°F)
psi
 ASTM D790
Flexural Strength (73°F)
psi
 ASTM D790
Compressive Strength
psi
 ASTM D695
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F, 0.125 in)
ft·lb/in
 ASTM D256
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Unannealed)
°F
 ASTM D648
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Electrafil® J-1/CF/10/TF/13/SI/2, Electrafil J1CF10TF13SI2, Electrafil® , Electrafil, ElectrafilJ1CF10TF13SI2, J 1 CF 10 TF 13 SI 2, J-1/CF/10/TF/13/SI/2, J1CF10TF13SI2, J-1:CF:10:TF:13:SI:2, J-1+CF+10+TF+13+SI+2, J-1-CF-10-TF-13-SI-2, J-1_CF_10_TF_13_SI_2, J-1 CF 10 TF 13 SI 2, J:1/CF/10/TF/13/SI/2, J/1/CF/10/TF/13/SI/2, J+1/CF/10/TF/13/SI/2, J_1/CF/10/TF/13/SI/2, J 1/CF/10/TF/13/SI/2, J1, 1CF, CF10, 10TF, TF13, 13SI, SI2, J1_CF_10_TF_13_SI_2, J1 CF 10 TF 13 SI 2, J_1CF10TF13SI2, J 1CF10TF13SI2, Polyamide 66, Nylon 66, Polyamide, Nylon, pa66, Techmer Lehvoss, Polyamide66, Nylon66, 1J
Generic Name
Generic Name may also be described by the following terms: PA66.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Rate
 
  
Back Pressure
psi
  
Injection Notes
Screw Speed: Medium
Recommendations for Molding and Tool Conditions: Well vented mold
Moisture Content, as received: Product is packaged at 0.2% or less.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.