IDES Prospector Already have an account? Login Here

IDES

ATTANE™ 4404G

Ultra Low Density Polyethylene Resin

Supplied by The Dow Chemical Company

The technical datasheet with complete property values for ATTANE™ 4404G is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
  • Provides improved cling in one-sided cling applications
  • It has improved toughness and optical properties

Complies with:
  • Canadian HPFB No Objection (with limitations)
  • EU, No 10/2011
  • U.S. FDA CFR 176.170(c)
  • U.S. FDA FCN 424
Consult the regulations for complete details.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Latin America
  • North America
Agency Ratings 
  •  1
  •  2
  
Forms 
  • Pellets
Processing Method 
  • Cast Film
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238
Films
Nominal Value
Unit
Test Method
Film Puncture Resistance
     Internal Method
0.80 mil
ft·lb/in³
  
2.0 mil
ft·lb/in³
  
Secant Modulus
     ASTM D882
2% Secant, MD: 0.80 mil
psi
  
2% Secant, MD: 2.0 mil
psi
  
2% Secant, TD: 0.80 mil
psi
  
2% Secant, TD: 2.0 mil
psi
  
Tensile Strength
     ASTM D882
MD: Yield, 0.80 mil
psi
  
MD: Yield, 2.0 mil
psi
  
TD: Yield, 0.80 mil
psi
  
TD: Yield, 2.0 mil
psi
  
MD: Break, 0.80 mil
psi
  
MD: Break, 2.0 mil
psi
  
TD: Break, 0.80 mil
psi
  
TD: Break, 2.0 mil
psi
  
Tensile Elongation
     ASTM D882
MD: Break, 0.80 mil
%
  
MD: Break, 2.0 mil
%
  
TD: Break, 0.80 mil
%
  
TD: Break, 2.0 mil
%
  
Dart Drop Impact
     ASTM D1709B
0.80 mil
g
  
2.0 mil
g
  
Elmendorf Tear Strength
     ASTM D1922
MD: 0.80 mil
g
  
MD: 2.0 mil
g
  
TD: 0.80 mil
g
  
TD: 2.0 mil
g
  
Oxygen Permeability (73°F, 2.0 mil)
cm³·mil/100in²/atm/24 hr
 ASTM D3985
Water Vapor Transmission Rate (2.0 mil)
g·mil/100in²/atm/24 hr
 ASTM F1249
Carbon Dioxide Transmission Rate (73°F, 2.0 mil)
cm³·mil/100in²/atm/24 hr
 Internal Method
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ASTM D1525
Melting Temperature (DSC)
°F
 Internal Method
Optical
Nominal Value
Unit
Test Method
Gloss
     ASTM D2457
45°, 0.800 mil
 
  
45°, 2.00 mil
 
  
Clarity
     ASTM D1746
0.800 mil
 
  
2.00 mil
 
  
Haze
     ASTM D1003
0.800 mil
%
  
2.00 mil
%
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: ATTANE™ 4404G, ATTANE 4404G, ATTANE™ , ATTANE, ATTANE4404G, 4404 G, 4404G, Polyethylene, Ultra Low Density, Polyethylene Ultra Low Density, ULDPE, Polyethylene, PE, Dow, PolyethyleneUltraLowDensity, G4404
Agency Ratings
This plastic material has 4 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EU (1), HPFB (Canada) (1), FDA (2).
Extrusion Notes
Fabrication Conditions For Cast Film:
  • Die Gap: 25 mil (2 mm)
  • Chill Roll Temperature: 70°F (21°C)
  • Line Speed: 200 fpm (61 m/min)
Notes
1Conditions of Use A through H
2With limitations
3Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.