IDES Prospector Already have an account? Login Here

IDES

GAPEX® APP40GR17HB-NA

Polypropylene Homopolymer

Glass\Mineral, 40%

Supplied by Ferro Corporation

The technical datasheet with complete property values for GAPEX® APP40GR17HB-NA is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Filler / Reinforcement 
  • Glass\Mineral, 40% Filler by Weight
Additive 
  • Heat Stabilizer
Features 
  • Chemically Coupled
  • Heat Stabilized
  
Appearance 
  • Natural Color
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ASTM D1238
Molding Shrinkage
     ASTM D955
Flow
in/in
  
Across Flow
in/in
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (73°F)
psi
 ASTM D638
Tensile Elongation (Break, 73°F)
%
 ASTM D638
Flexural Modulus
     ASTM D790
1% Secant: 73°F
psi
  
Tangent: 73°F
psi
  
Flexural Strength (73°F)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
ft·lb/in
 ASTM D256
Unnotched Izod Impact
ft·lb/in
 ASTM D256
Gardner Impact
in·lb
 ASTM D5420
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     ASTM D648
66 psi, Unannealed
°F
  
264 psi, Unannealed
°F
  
Additional Information
The value listed as Unnotched Izod Impact, ASTM D256, was tested in accordance with ASTM D4812.
Filler Content, ASTM D2584: 40.0%
Testing and measurements were performed at 73 +/-3°F and 50 +/-5% relative humidity unless otherwise noted.
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: GAPEX® APP40GR17HB-NA, GAPEX APP40GR17HBNA, GAPEX® , GAPEX, GAPEXAPP40GR17HBNA, APP 40 GR 17 HB, APP40GR17HB, APP 40 GR 17 HB NA, APP40GR17HB-NA, APP40GR17HBNA, APP40GR17HB:NA, APP40GR17HB/NA, APP40GR17HB+NA, APP40GR17HB_NA, APP40GR17HB NA, APP40, 40GR, GR17, 17HB, HBNA, Polypropylene Homopolymer, PP Homopolymer, Polypropylene, PP, Ferro, PolypropyleneHomopolymer, PPHomopolymer, 40APP
Features
Features may also be described by the following terms: Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.