IDES Prospector Already have an account? Login Here

IDES

VICTREX® PEEK 450FC30

Polyetheretherketone

Carbon\Graphite\PTFE, 30%

Supplied by Victrex plc

The technical datasheet with complete property values for VICTREX® PEEK 450FC30 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
High performance thermoplastic material, 30% reinforced with carbon fibre / graphite / PTFE PolyEtherEtherKetone (PEEK), semi crystalline, granules for injection moulding and extrusion, standard flow, colour black.

Tribological applications for high strength. Excellent wear resistance, very low coefficient of friction, low coefficient of thermal expansion. Chemically resistant to aggressive environments.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Filler / Reinforcement 
  • Carbon\Graphite\PTFE, 30% Filler by Weight
Features 
  • Good Chemical Resistance
  • Good Flow
  • Good Wear Resistance
  • High Strength
  • Low Friction
  • Semi Crystalline
Agency Ratings 
Appearance 
  • Black
Forms 
  • Granules
Processing Method 
  • Extrusion
  • Injection Molding
  
Physical
Nominal Value
Unit
Test Method
Density 2
g/cm³
 ISO 1183
Molding Shrinkage 3
     ISO 294-4
Across Flow: 392°F
%
  
Flow: 392°F
%
  
Water Absorption
     ISO 62
73°F, 24 hr, 0.126 in
%
  
Equilibrium, 73°F, 0.126 in, 50% RH
%
  
Spiral Flow 3
      
392°F, 39.4 mil
in
 ExxonMobil Method
392°F, 0.12 in
in
 Internal Method
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (73°F)
psi
 ISO 527-2
Tensile Stress
     ISO 527-2
Break, 73°F
psi
  
Break, 257°F
psi
  
Break, 347°F
psi
  
Break, 437°F
psi
  
Break, 527°F
psi
  
Tensile Strain (Break, 73°F)
%
 ISO 527-2
Flexural Modulus (73°F)
psi
 ISO 178
Flexural Strength (73°F)
psi
 ISO 178
Compressive Stress
     ISO 604
73°F
psi
  
248°F
psi
  
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
 ISO 179/1eA
Charpy Unnotched Impact Strength (73°F)
ft·lb/in²
 ISO 179/1U
Notched Izod Impact Strength (73°F)
ft·lb/in²
 ISO 180/A
Unnotched Izod Impact Strength (73°F)
ft·lb/in²
 ISO 180
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D, 73°F)
 
 ISO 868
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
 ISO 75-2/A
Glass Transition Temperature
°F
 ISO 11357-2
Melting Temperature
°F
 ISO 11357-3
CLTE
     ISO 11359-2
Flow: < 289°F
in/in/°F
  
Flow: > 289°F
in/in/°F
  
Transverse: < 289°F
in/in/°F
  
Transverse: > 289°F
in/in/°F
  
Specific Heat (73°F)
Btu/lb/°F
 DSC
Thermal Conductivity (73°F)
Btu·in/hr/ft²/°F
 Internal Method
Electrical
Nominal Value
Unit
Test Method
Volume Resistivity 4 (73°F)
ohm·cm
 IEC 60093
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0295 in)
 
 UL 94
Glow Wire Flammability Index (0.0787 in)
°F
 IEC 60695-2-12
Oxygen Index
%
 ISO 4589-2
UL
Nominal Value
Unit
Test Method
RTI Str
°F
 UL 746
RTI Imp
°F
 UL 746
Fill Analysis
Nominal Value
Unit
Test Method
Melt Viscosity (752°F)
Pa·s
 ISO 11443
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: VICTREX® PEEK 450FC30, VICTREX PEEK 450FC30, VICTREX® PEEK , VICTREX PEEK, VICTREXPEEK450FC30, VICTREXPEEK, PEEK 450 FC 30, PEEK450FC30, PEEK450, PEEK, 450 FC 30, 450FC30, 450FC, FC30, Polyetheretherketone, Polyaryletherketone, PAEK, Victrex, FC450, 450PEEK
Features
Features may also be described by the following terms: Good Flow, High Strength, Good Chemical Resistance, Chemical Resistant, Good Wear Resistance, Wear Resistant, Low Friction, Semi-Crystalline.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Hopper Temperature
°F
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Mold Temperature
°F
  
Injection Notes
Runner: Die / nozzle >3mm, manifold >3.5mm
Gate: >2mm or 0.5 x part thickness
Notes
1Typical properties: these are not to be construed as specifications.
2Crystalline
3385°C nozzle
41V
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.