Borealis PP BA202E Borealis Polypropylene Copolymer

Product Description

BA202E is a high molecular weight, low melt flow rate polypropylene block copolymer with very high impact strength.

BA202E is recommended for non-pressure pipes & fittings, thin-walled corrugated pipes and profiles.

General

Material Status

Commercial: Active

Availability

Europe

North America

Features

Block Copolymer

High Molecular Weight

Low Flow

Ultra High Impact Resistance

Uses

Corrugated Pipe

Fittings

Pipe Coatings

Piping

Profiles

Forms

Pellets

Processing Method

Extrusion

Profile Extrusion

Multi-Point Data

Isothermal Stress vs. Strain (ISO 11403-1)

Secant Modulus vs. Strain (ISO 11403-1)

Viscosity vs. Shear Rate (ISO 11403-2)

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)		g/10 min	ISO 1133
Mechanical	Nominal Value	Unit	Test Method
Tensile modulus		psi	ISO 527-2²
Tensile Stress
Yield		psi	ISO 527-2/50
Yield		psi	ISO 527-2²
Tensile Strain
Yield		%	ISO 527-2/50
Yield		%	ISO 527-2²
Nominal strain at break		%	ISO 527-2²
Flexural Modulus³		psi	ISO 178
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength			ISO 179/1eA
-4°F		ft·lb/in²
73°F		ft·lb/in²
Hardness	Nominal Value	Unit	Test Method
Shore Hardness (Shore D)			ISO 868
Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load			ISO 75-2²
66 psi		°F
264 psi		°F
Vicat Softening Temperature (50°C/h, B (50N))		°F	ISO 306²
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Borealis PP BA202E, Borealis PP , BorealisPPBA202E, BorealisPP, PPBA 202 E, PPBA202E, PPBA202, PP, BA 202 E, BA202E, BA202, 202E, Polypropylene Copolymer, PP Copolymer, Polypropylene, Borealis, PolypropyleneCopolymer, PPCopolymer, 202BA, 202PPBA
Features
Features may also be described by the following terms: Low Flow, Low Melt, Low MFI, Ultra High Impact Resistance, High Molecular Weight, High MW, Block Copolymer.
Uses
Uses may also be described by the following terms: Corrugated Pipe, Piping, Pipe, Pipe Coatings, Pipe Coating.

Extrusion	Nominal Value	Unit
Cylinder Zone 1 Temp.		°F
Cylinder Zone 2 Temp.		°F
Cylinder Zone 3 Temp.		°F
Cylinder Zone 4 Temp.		°F
Cylinder Zone 5 Temp.		°F
Melt Temperature		°F
Die Temperature		°F
Extrusion Notes
Head: 210 to 220°C

Notes

¹Typical properties: these are not to be construed as specifications.

²Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.

³0.079 in/min

Borealis PP BA202E

Polypropylene Copolymer

Supplied by Borealis AG