IDES Prospector Already have an account? Login Here

IDES

Borealis PP BA204E

Polypropylene Copolymer

Supplied by Borealis AG

The technical datasheet with complete property values for Borealis PP BA204E is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
BA204E is a high molecular weight, low melt flow rate polypropylene block copolymer with very high impact strength.

BA204E is recommended for non-pressure pipes & fittings, thin-walled corrugated pipes and profiles.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
  
Features 
  • Block Copolymer
  • High Impact Resistance
  • High Molecular Weight
  • Low Flow
  
Uses 
  • Corrugated Pipe
  • Fittings
  • Piping
  • Profiles
  
Automotive Specifications 
Forms 
  • Pellets
Processing Method 
  • Extrusion
Multi-Point Data 
  • Isothermal Stress vs. Strain (ISO 11403-1)
  • Secant Modulus vs. Strain (ISO 11403-1)
  
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile modulus
psi
 ISO 527-2 2
Tensile Stress
      
Yield
psi
 ISO 527-2/50
Yield
psi
 ISO 527-2 2
Tensile Strain
      
Yield
%
 ISO 527-2/50
Yield
%
 ISO 527-2 2
Nominal strain at break
%
 ISO 527-2 2
Flexural Modulus 3
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
      
-4°F
ft·lb/in²
 ISO 179/1eA
73°F
ft·lb/in²
 ISO 179/1eA
-22°F
ft·lb/in²
 ISO 179/1eA 2
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     ISO 75-2 2
66 psi
°F
  
264 psi
°F
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Borealis PP BA204E, Borealis PP , BorealisPPBA204E, BorealisPP, PPBA 204 E, PPBA204E, PPBA204, PP, BA 204 E, BA204E, BA204, 204E, Polypropylene Copolymer, PP Copolymer, Polypropylene, Borealis, PolypropyleneCopolymer, PPCopolymer, 204BA, 204PPBA
Features
Features may also be described by the following terms: High Impact Resistance, High Molecular Weight, High MW, Low Flow, Low Melt, Low MFI, Block Copolymer.
Uses
Uses may also be described by the following terms: Corrugated Pipe, Piping, Pipe.
Automotive Specifications
This plastic material has approval for 1 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): GM (1).
Extrusion
Nominal Value
Unit
 
Cylinder Zone 1 Temp.
°F
  
Cylinder Zone 2 Temp.
°F
  
Cylinder Zone 3 Temp.
°F
  
Cylinder Zone 4 Temp.
°F
  
Cylinder Zone 5 Temp.
°F
  
Melt Temperature
°F
  
Die Temperature
°F
  
Extrusion Notes
Head: 210 to 220°C
Notes
1Typical properties: these are not to be construed as specifications.
2Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
30.079 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.