Pebax 4033 SN 01 Arkema Polyether Block Amide

General

Material Status

Commercial: Active

Availability

Africa & Middle East

Asia Pacific

Europe

Latin America

North America

South America

Features

Good Impact Resistance

Good UV Resistance

High Heat Resistance

Platable

Appearance

Clear/Transparent

Forms

Granules

Processing Method

Blow Molding

Calendering

Casting

Coating

Extrusion

Film Extrusion

Injection Molding

Profile Extrusion

Resin Transfer Molding

Sheet Extrusion

Thermoforming

Multi-Point Data

Creep Modulus vs. Time (ISO 11403-1)

Isochronous Stress vs. Strain (ISO 11403-1)

Isothermal Stress vs. Strain (ISO 11403-1)

Secant Modulus vs. Strain (ISO 11403-1)

Viscosity vs. Shear Rate (ISO 11403-2)

Physical	Dry	Conditioned	Unit	Test Method
Density			lb/in³	ISO 1183²
Melt volume-flow rate (235°C/1.0 kg)		--	in³/10min	ISO 1133²
Water Absorption				ISO 62²
Saturation		--	%
Equilibrium		--	%
Mechanical	Dry	Conditioned	Unit	Test Method
Tensile modulus			psi	ISO 527-2²
Tensile Stress (50% Strain)			psi	ISO 527-2²
Tensile Strain (Break)			%	ISO 527-2²
Impact	Dry	Conditioned	Unit	Test Method
Charpy notched impact strength				ISO 179/1eA²
-22°F	--
73°F	--
Charpy impact strength				ISO 179/1eU²
-22°F	--
73°F	--
Thermal	Dry	Conditioned	Unit	Test Method
Deflection Temperature Under Load (66 psi)		--	°F	ISO 75-2²
Melting Temperature³		--	°F	ISO 11357-3²
CLTE - Flow		--	in/in/°F	ISO 11359-2²
Electrical	Dry	Conditioned	Unit	Test Method
Surface resistivity	--		ohms	IEC 60093²
Volume resistivity		--	ohm·in	IEC 60093²
Relative Permittivity				IEC 60250²
100 Hz		--
1 MHz		--
Dissipation Factor				IEC 60250²
100 Hz		--
1 MHz		--
Comparative tracking index	--			IEC 60112²
Electric strength		--	V/mil	IEC 60243-1²
Flammability	Dry	Conditioned	Unit	Test Method
Burning Behav. at 1.6mm nom. thickn. (0.06 in, UL)		--		ISO 1210²
Related Terminology
Dry	Product names can be difficult to match. You may have searched any one of these terms to find this product: Pebax® 4033 SN 01, Pebax 4033 SN 01, Pebax® , Pebax, Pebax4033SN01, 4033 SN 01, 4033SN, SN01, 4033SN01, Polyether Block Amide, PEBA-Ether, PEBAEther, PEBA:Ether, PEBA/Ether, PEBA+Ether, PEBA_Ether, PEBA Ether, Thermoplastic Elastomer, TPE, Arkema, PolyetherBlockAmide, ThermoplasticElastomer, SN4033
Features
Dry	Features may also be described by the following terms: Good UV Resistance, UV Resistant, Ultraviolet Resistant, Ultraviolet Light Resistant, High Heat Resistance, Good Impact Resistance.
Conditioned	Product names can be difficult to match. You may have searched any one of these terms to find this product: Pebax® 4033 SN 01, Pebax 4033 SN 01, Pebax® , Pebax, Pebax4033SN01, 4033 SN 01, 4033SN, SN01, 4033SN01, Polyether Block Amide, PEBA-Ether, PEBAEther, PEBA:Ether, PEBA/Ether, PEBA+Ether, PEBA_Ether, PEBA Ether, Thermoplastic Elastomer, TPE, Arkema, PolyetherBlockAmide, ThermoplasticElastomer, SN4033

Notes

¹Typical properties: these are not to be construed as specifications.

²Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.

³18 °F/min

Pebax® 4033 SN 01

Polyether Block Amide

Supplied by Arkema