IDES Prospector Already have an account? Login Here

IDES

ExxonMobil™ HDPE HMA 016

High Density Polyethylene Resin

Supplied by ExxonMobil Chemical

The technical datasheet with complete property values for ExxonMobil™ HDPE HMA 016 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
HMA 016 is a HDPE grade, characterized by fast cycling and good impact strength. It has high gloss and high dimensional stability.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
Additive 
  • Heat Stabilizer
Physical
Nominal Value
Unit
Test Method
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238
Environmental Stress-Cracking Resistance (122°F, 10% Igepal)
hr
 ASTM D1693
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress (Yield)
psi
 ISO 527-2/1A/50
Tensile Strain
     ISO 527-2/1A/50
Yield
%
  
Break
%
  
Flexural Modulus
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact Strength
ft·lb/in²
 ISO 180/1A
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (66 psi, Unannealed)
°F
 ISO 75-2/B
Peak Melting Temperature
°F
 ASTM D3418
Additional Information
The molded properties were measured on 4 mm (157.5 mil) thick injection molded specimen based on ISO 294-1.
ESCR was measured on 2 mm (78.7 mil) thick compression molded plate (F50, 10 % Igepal, 50°C, 122°F)
Legal Statement
Contact your ExxonMobil Chemical Customer Service Representative for potential food contact application compliance (e.g. FDA, EU, HPFB).

This product is not intended for use in medical applications and should not be used in any such applications.
Related Terminology
This supplier and product may also be known by these terms: Exxon, Exxon Mobil, Exxon Mobile, Advanced Elastomer Systems, AES

Product names can be difficult to match. You may have searched any one of these terms to find this product: ExxonMobil™ HDPE HMA 016, ExxonMobil HDPE HMA 016, ExxonMobil™ HDPE , ExxonMobil HDPE, ExxonMobilHDPEHMA016, ExxonMobilHDPE, HDPEHMA 016, HDPE, HDPEHMA016, HMA 016, HMA016, Polyethylene, High Density, Polyethylene High Density, Polyethylene, PE, ExxonMobil, PolyethyleneHighDensity, 016HMA, 016HDPEHMA
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.