IDES Prospector Already have an account? Login Here

IDES

Zytel® ST801AHS NC010

NYLON RESIN

Supplied by DuPont Performance Polymers

The technical datasheet with complete property values for Zytel® ST801AHS NC010 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Zytel® ST801AHS NC010 is a Super Tough, high performance polyamide 66 resin. It offers outstanding molding performance in injection molding applications.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Additive 
  • Heat Stabilizer
  • Impact Modifier
  
Features 
  • Fuel Resistant
  • Good Chemical Resistance
  • Good Heat Aging Resistance
  • Good Thermal Aging Resistance
  • Grease Resistant
  • Heat Stabilized
  • High Impact Resistance
  • Impact Modified
  • Low Temperature Toughness
  • Oil Resistant
  • Ultra High Toughness
  • Ultrasonic Weldable
Uses 
  • Appliance Components
  • Automotive Applications
  • Electrical/Electronic Applications
  • Industrial Applications
  • Sporting Goods
RoHS Compliance 
Automotive Specifications 
  •  1
  •  1
Appearance 
  • Natural Color
Processing Method 
  • Injection Molding
Multi-Point Data 
  • Isothermal Stress vs. Strain (ISO 11403-1)
Part Marking Code (ISO 11469)
  • >PA66-HI<
Resin ID (ISO 1043)
  • PA66-HI
Physical
Dry
Conditioned
Unit
Test Method
Density
--
g/cm³
 ISO 1183
Molding Shrinkage       ISO 294-4
Across Flow: 0.0787 in
--
%
  
Flow: 0.0787 in
--
%
  
Water Absorption       ISO 62
73°F, 24 hr
--
%
  
Saturation, 73°F
--
%
  
Equilibrium, 73°F, 0.0394 in, 50% RH
--
%
  
Mechanical
Dry
Conditioned
Unit
Test Method
Tensile Modulus       ISO 527-2
-40°F
psi
  
32°F
psi
  
73°F
psi
  
140°F
psi
  
176°F
psi
  
212°F
psi
  
248°F
psi
  
302°F
psi
  
Tensile Stress       ISO 527-2
Yield, -40°F
psi
  
Yield, 32°F
psi
  
Yield, 73°F
psi
  
50% Strain, -40°F
psi
  
50% Strain, 32°F
psi
  
50% Strain, 73°F
psi
  
50% Strain, 140°F
psi
  
50% Strain, 176°F
psi
  
50% Strain, 212°F
psi
  
50% Strain, 248°F
psi
  
50% Strain, 302°F
psi
  
Tensile Strain       ISO 527-2
Yield, -40°F
%
  
Yield, 32°F
%
  
Yield, 73°F
%
  
Yield, 140°F
%
  
Yield, 176°F
%
  
Yield, 212°F
%
  
Yield, 248°F
%
  
Yield, 302°F
%
  
Break, 73°F
--
%
  
Nominal Tensile Strain at Break       ISO 527-2
-40°F
%
  
32°F
%
  
73°F
%
  
140°F
%
  
176°F
%
  
212°F
%
  
248°F
%
  
302°F
%
  
Flexural Modulus       ISO 178
-40°F
psi
  
32°F
psi
  
73°F
psi
  
212°F
psi
  
248°F
psi
  
Impact
Dry
Conditioned
Unit
Test Method
Charpy Notched Impact Strength       ISO 179/1eA
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Charpy Unnotched Impact Strength (73°F)
 
 ISO 179/1eU
Notched Izod Impact Strength       ISO 180/1A
-40°F
ft·lb/in²
  
-4°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Thermal
Dry
Conditioned
Unit
Test Method
Heat Deflection Temperature        
66 psi, Unannealed
--
°F
 ISO 75-2/B
264 psi, Unannealed
--
°F
 ISO 75-2/A
Glass Transition Temperature
--
°F
 ISO 11357-2
Melting Temperature 3
--
°F
 ISO 11357-3
CLTE       ASTM E831, ISO 11359-2
Flow: -40 to 73°F
--
in/in/°F
  
Flow: -22 to 86°F
--
in/in/°F
  
Flow: 73 to 131°F
--
in/in/°F
  
Flow: 131 to 320°F
--
in/in/°F
  
Transverse: -40 to 73°F
--
in/in/°F
  
Transverse: -22 to 86°F
--
in/in/°F
  
Transverse: 73 to 131°F
--
in/in/°F
  
Transverse: 131 to 320°F
--
in/in/°F
  
Electrical
Dry
Conditioned
Unit
Test Method
Surface Resistivity
ohms
 IEC 60093
Volume Resistivity
ohm·cm
 IEC 60093
Relative Permittivity       IEC 60250
73°F, 100 Hz
 
  
73°F, 1 MHz
 
  
Dissipation Factor       IEC 60250
73°F, 100 Hz
 
  
73°F, 1 MHz
 
  
Comparative Tracking Index
--
V
 IEC 60112
Electric Strength (73°F, 0.0787 in)
V/mil
 IEC 60243-1
Flammability
Dry
Conditioned
Unit
Test Method
Flame Rating - UL       UL 94
0.0295 in
--
 
  
0.0591 in
--
 
  
0.118 in
--
 
  
Flammability Classification       IEC 60695-11-10, -20
0.0295 in
--
 
  
0.0591 in
--
 
  
0.118 in
--
 
  
UL
Dry
Conditioned
Unit
Test Method
RTI Str       UL 746
0.0295 in
--
°F
  
0.0591 in
--
°F
  
0.118 in
--
°F
  
RTI Imp       UL 746
0.0295 in
--
°F
  
0.0591 in
--
°F
  
0.118 in
--
°F
  
RTI Elec       UL 746
0.0295 in
--
°F
  
0.0591 in
--
°F
  
0.118 in
--
°F
  
Comparative Tracking Index (CTI) (0.118 in)
--
V
 UL 746
Comparative Tracking Index (CTI) (PLC) (0.118 in)
--
 
 UL 746
Related Terminology
Dry
Product names can be difficult to match. You may have searched any one of these terms to find this product: Zytel® ST801AHS NC010, Zytel ST801AHS NC010, Zytel® , Zytel, ZytelST801AHSNC010, ST 801 AHS NC 010, ST801AHS NC010, ST801, 801AHS, AHSNC, NC010, ST801AHSNC010, Polyamide 66, Nylon 66, Polyamide, Nylon, pa66, DuPont, Polyamide66, Nylon66, 801ST
Generic Name
Dry
Generic Name may also be described by the following terms: PA66.
Conditioned
Generic Name may also be described by the following terms: PA66.
Features
Dry
Features may also be described by the following terms: Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized, Ultra High Toughness, Low Temperature Toughness, Good Thermal Aging Resistance, Thermal Aging Resistant, Good Heat Aging Resistance, High Impact Resistance, Good Chemical Resistance, Chemical Resistant, Ultrasonic Weldable.
Uses
Dry
Uses may also be described by the following terms: Automotive Applications, Automotive Sector, Electrical Applications, Electronic Applications, Electrical/Electronic Applications, Electrical Sector, Appliance Components, Appliance Parts.
Automotive Specifications
Dry
This plastic material has approval for 6 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): FORD (1), ASTM (2), CHRYSLER (1), GM (2).
Conditioned
Product names can be difficult to match. You may have searched any one of these terms to find this product: Zytel® ST801AHS NC010, Zytel ST801AHS NC010, Zytel® , Zytel, ZytelST801AHSNC010, ST 801 AHS NC 010, ST801AHS NC010, ST801, 801AHS, AHSNC, NC010, ST801AHSNC010, Polyamide 66, Nylon 66, Polyamide, Nylon, pa66, DuPont, Polyamide66, Nylon66, 801ST
Injection
Dry
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Processing (Melt) Temp
°F
  
Melt Temperature, Optimum
°F
  
Mold Temperature
°F
  
Mold Temperature, Optimum
°F
  
Drying Recommended
 
  
Notes
1This specification is applicable for the Americas region.
2Typical properties: these are not to be construed as specifications.
310°C/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.