IDES Prospector Already have an account? Login Here

IDES

Rilsan® AECN TL

Polyamide 12

Supplied by Arkema

The technical datasheet with complete property values for Rilsan® AECN TL is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
  • South America
Additive 
  • Lubricant
Features 
  • Good UV Resistance
  • High Heat Resistance
  • Lubricated
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Multi-Point Data 
  • Isothermal Stress vs. Strain (ISO 11403-1)
  • Secant Modulus vs. Strain (ISO 11403-1)
  • Viscosity vs. Shear Rate (ISO 11403-2)
Physical
Dry
Conditioned
Unit
Test Method
Density
lb/in³
 ISO 1183 2
Melt volume-flow rate (235°C/2.16 kg)
--
in³/10min
 ISO 1133 2
Water Absorption (Saturation)
--
%
 ISO 62 2
Mechanical
Dry
Conditioned
Unit
Test Method
Tensile modulus
psi
 ISO 527-2 2
Tensile Stress (Yield)
psi
 ISO 527-2 2
Tensile Strain (Yield)
%
 ISO 527-2 2
Nominal strain at break
%
 ISO 527-2 2
Impact
Dry
Conditioned
Unit
Test Method
Charpy notched impact strength
       ISO 179/1eA 2
-22°F
--
ft·lb/in²
  
73°F
--
ft·lb/in²
  
Charpy impact strength
       ISO 179/1eU 2
-22°F
--
 
  
73°F
--
 
  
Thermal
Dry
Conditioned
Unit
Test Method
Deflection Temperature Under Load
       ISO 75-2 2
66 psi
--
°F
  
264 psi
--
°F
  
Vicat Softening Temperature (50°C/h, B (50N))
--
°F
 ISO 306 2
Melting Temperature 3
--
°F
 ISO 11357-3 2
CLTE - Flow
--
in/in/°F
 ISO 11359-2 2
Electrical
Dry
Conditioned
Unit
Test Method
Surface resistivity
--
ohm
 IEC 60093 2
Volume resistivity
--
ohm·in
 IEC 60093 2
Relative Permittivity
       IEC 60250 2
100 Hz
--
 
  
1 MHz
--
 
  
Dissipation Factor
       IEC 60250 2
100 Hz
--
 
  
1 MHz
--
 
  
Comparative tracking index
--
 
 IEC 60112 2
Electric strength
V/mil
 IEC 60243-1 2
Flammability
Dry
Conditioned
Unit
Test Method
Burning Behav. at 1.6mm nom. thickn. (0.06 in)
--
 
 ISO 1210 2
Burning Behav. at thickness h (0.126 in)
--
 
 ISO 1210 2
Oxygen index
--
%
 ISO 4589-2 2
Related Terminology
Dry
Product names can be difficult to match. You may have searched any one of these terms to find this product: Rilsan® AECN TL, Rilsan AECN TL, Rilsan® , Rilsan, RilsanAECNTL, AECN TL, AECNTL, Polyamide 12, Nylon 12, Polyamide, Nylon, pa12, Arkema, Polyamide12, Nylon12, TLAECN
Generic Name
Dry
Generic Name may also be described by the following terms: PA12.
Conditioned
Generic Name may also be described by the following terms: PA12.
Features
Dry
Features may also be described by the following terms: Good UV Resistance, UV Resistant, Ultraviolet Resistant, Ultraviolet Light Resistant, High Heat Resistance.
Conditioned
Product names can be difficult to match. You may have searched any one of these terms to find this product: Rilsan® AECN TL, Rilsan AECN TL, Rilsan® , Rilsan, RilsanAECNTL, AECN TL, AECNTL, Polyamide 12, Nylon 12, Polyamide, Nylon, pa12, Arkema, Polyamide12, Nylon12, TLAECN
Notes
1Typical properties: these are not to be construed as specifications.
2Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
318 °F/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.