TECHNYL® C 206 Rhodia Polyamide 6

Product Description

Unreinforced Polyamide PA6, standard for fast cycling, for injection moulding.

TECHNYL® C 206 has fluidity and a good mould release, favoured by a high crystallisation rate.
It is especially suitable for the production of technical mouldings with fast injection cycles.

General

Material Status

Commercial: Active

Availability

Africa & Middle East

Asia Pacific

Europe

Latin America

North America

South America

Features

Fast Molding Cycle

Good Mold Release

Appearance

Natural Color

Forms

Pellets

Processing Method

Injection Molding

Multi-Point Data

Isothermal Stress vs. Strain (ISO 11403-1)

Secant Modulus vs. Strain (ISO 11403-1)

Viscosity vs. Shear Rate (ISO 11403-2)

Part Marking Code (ISO 11469)

>PA6<

Physical	Dry	Conditioned	Unit	Test Method
Density
--		--	g/cm³	ISO 1183
--		--	lb/in³	ISO 1183²
Water Absorption (73°F, 24 hr)		--	%	ISO 62
Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Modulus
--			psi	ISO 527-2/1A
--			psi	ISO 527-2²
Tensile Stress
Yield			psi	ISO 527-2/1A
Break			psi	ISO 527-2²
Tensile Strain (Break)			%	ISO 527-2²
Flexural Modulus			psi	ISO 178
Flexural Strength			psi	ISO 178
Impact	Dry	Conditioned	Unit	Test Method
Charpy notched impact strength (73°F)			ft·lb/in²	ISO 179/1eA²
Charpy impact strength (73°F)				ISO 179/1eU²
Notched Izod Impact Strength			ft·lb/in²	ISO 180/1A
Thermal	Dry	Conditioned	Unit	Test Method
Heat Deflection Temperature
264 psi, Unannealed		--	°F	ISO 75-2/Af
264 psi		--	°F	ISO 75-2²
Melting Temperature (DSC)
--		--	°F	ISO 3146
--³		--	°F	ISO 11357-3²
CLTE
Flow		--	in/in/°F	ISO 11359-2²
Transverse: 73 to 185°F		--	in/in/°F	ISO 11359-2
Electrical	Dry	Conditioned	Unit	Test Method
Surface Resistivity
--			ohm	IEC 60093
--	--		ohm	IEC 60093²
Volume Resistivity
--			ohm·cm	IEC 60093
--			ohm·in	IEC 60093²
Relative Permittivity (1 MHz)				IEC 60250²
Dissipation Factor
--				IEC 60250
1 MHz				IEC 60250²
Electric Strength	--		V/mil	IEC 60243-1
Flammability	Dry	Conditioned	Unit	Test Method
Burning Behav. at 1.6mm nom. thickn. (0.06 in)		--		ISO 1210²
Additional Information
Dry	The value listed as Melting Temperature (DSC), ISO 3146, was tested in accordance with ISO 11357.
Related Terminology
Dry	Product names can be difficult to match. You may have searched any one of these terms to find this product: TECHNYL® C 206, TECHNYL C 206, TECHNYL® C , TECHNYL C, TECHNYLC206, TECHNYLC, C 206, C206, 206, Polyamide 6, Nylon 6, Polyamide, Nylon, pa6, Rhodia, Polyamide6, Nylon6, 206C
Generic Name
Dry	Generic Name may also be described by the following terms: PA6.
Conditioned	Generic Name may also be described by the following terms: PA6.
Features
Dry	Features may also be described by the following terms: Fast Cycle, Rapid Cycle, Productivity, Fast Molding Cycle, Good Mold Release, Easy Release, Good Demolding.
Conditioned	Product names can be difficult to match. You may have searched any one of these terms to find this product: TECHNYL® C 206, TECHNYL C 206, TECHNYL® C , TECHNYL C, TECHNYLC206, TECHNYLC, C 206, C206, 206, Polyamide 6, Nylon 6, Polyamide, Nylon, pa6, Rhodia, Polyamide6, Nylon6, 206C

Injection	Dry	Unit
Drying Temperature		°F
Suggested Max Moisture		%
Rear Temperature		°F
Middle Temperature		°F
Front Temperature		°F
Mold Temperature		°F

Notes

¹Typical properties: these are not to be construed as specifications.

²Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.

³18 °F/min

TECHNYL® C 206

Polyamide 6

Supplied by Rhodia Engineering Plastics SA