IDES Prospector Already have an account? Login Here

IDES

LACEA® H-100J (Unstretched)

Polylactic Acid

Supplied by Mitsui Chemicals, Inc.

The technical datasheet with complete property values for LACEA® H-100J (Unstretched) is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Features 
  • Biodegradable
Uses 
  • Bags
  • Containers
  • Film
  • Nonwovens
  • Packaging
Appearance 
  • Clear/Transparent
Forms 
  • Pellets
Processing Method 
  • Blown Film
  • Injection Molding
 
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ASTM D1505
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength
psi
ASTM D638
Tensile Elongation (Yield)
%
ASTM D638
Flexural Modulus
psi
ASTM D790
Flexural Strength
psi
ASTM D790
Films
Nominal Value
Unit
Test Method
Film Thickness - Tested
mil
 
Secant Modulus - MD
psi
ASTM D882
Tensile Strength - MD (Yield)
psi
ASTM D882
Tensile Elongation - MD (Break)
%
ASTM D882
Oxygen Permeability
cm³·mil/100in²/atm/24 hr
ASTM D3985
Water Vapor Transmission
g/100 in²/24 hr
ASTM E96
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
ft·lb/in
ASTM D256
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness
    ASTM D785
L-Scale
 
 
R-Scale
 
 
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (66 psi, Unannealed)
°F
ASTM D648
Vicat Softening Temperature
°F
ASTM D1525
Additional Information
The value listed as Oxygen Permeability, ASTM D3985, was tested in accordance with JIS-K7126.
The value listed as Water Vapor Transmission, ASTM E96, was tested in accordance with JIS-K7129.
The value listed as Density, ASTM D1505, was tested in accordance with JIS-K6758.
The value listed as Tensile Strength @ Yld MD, ASTM D882, was tested in accordance with JIS-C2318.
The value listed as Elongation @ Break MD, ASTM D882, was tested in accordance with JIS-C2318.
The value listed as Secant Modulus MD, ASTM D882, was tested in accordance with JIS-C2318.
Oxygen Permeability, JIS-K7126. 23°C, Method A: 60 cm³/m²/day/atm
Nitrogen Permeability, JIS-K7126. 23°C, Method A: 4 cm³/m²/day/atm
CO2 Permeability, JIS-K7126. 23°C, Method A: 120 cm³/m²/day/atm
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: LACEA® H-100J, LACEA H 100J, LACEA® H-100J (Unstretched), LACEA H100J Unstretched, LACEA® , LACEA, LACEAH100JUnstretched, H 100 J, H100J, H-100J, H 100J, H 100 J Unstretched, H-100J (Unstretched), H100J Unstretched, H:100J (Unstretched), H:100J, H/100J (Unstretched), H/100J, H+100J (Unstretched), H+100J, H_100J (Unstretched), H_100J, H 100J (Unstretched), H100, 100J, JUnstretched, H100JUnstretched, H_100J Unstretched, H 100J Unstretched, H_100JUnstretched, Polylactic Acid, PLA, Mitsui Chem, PolylacticAcid, 100H
Uses
Uses may also be described by the following terms: Non-wovens, Non-woven, Nonwoven, Nonwovens.
Injection
Nominal Value
Unit
 
Rear Temperature
°F
 
Middle Temperature
°F
 
Front Temperature
°F
 
Nozzle Temperature
°F
 
Mold Temperature
°F
 
Injection Notes
Cooling Time: 30 to 40 sec
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.