| Density |
|
g/cm³
|
ISO 1183 |
| Melt Volume-Flow Rate (MVR) (250°C/2.16 kg) |
|
in³/10min
|
ISO 1133 |
| Molding Shrinkage |
|
|
ISO 294-4 |
|
Across Flow 2
|
|
%
|
|
|
Flow 2
|
|
%
|
|
|
Across Flow: 0.0787 in
|
|
%
|
|
|
Flow: 0.0787 in
|
|
%
|
|
| Water Absorption |
|
|
ISO 62 |
|
Saturation, 73°F
|
|
%
|
|
|
Equilibrium, 73°F, 50% RH
|
|
%
|
|
| Tensile Modulus (73°F) |
|
psi
|
ISO 527-2 |
| Tensile Stress (Yield, 73°F) |
|
psi
|
ISO 527-2 |
| Tensile Strain |
|
|
|
|
Yield, 73°F
|
|
%
|
ISO 527-2 |
|
Break, 73°F
|
|
%
|
ISO 527-2/50 |
| Nominal Tensile Strain at Break (73°F) |
|
%
|
ISO 527-2 |
| Tensile Creep Modulus |
|
|
ISO 899-1 |
|
1 hr
|
|
psi
|
|
|
1000 hr
|
|
psi
|
|
| Flexural Modulus (73°F) |
|
psi
|
ISO 178 |
| Flexural Strength (73°F) |
|
psi
|
ISO 178 |
| Charpy Notched Impact Strength |
|
|
ISO 179/1eA |
|
-22°F
|
|
ft·lb/in²
|
|
|
73°F
|
|
ft·lb/in²
|
|
| Charpy Unnotched Impact Strength |
|
|
ISO 179/1eU |
|
-22°F
|
|
|
|
|
73°F
|
|
|
|
| Notched Izod Impact Strength |
|
|
ISO 180/1A |
|
-22°F
|
|
ft·lb/in²
|
|
|
73°F
|
|
ft·lb/in²
|
|
| Unnotched Izod Impact Strength |
|
|
ISO 180/1U |
|
-22°F
|
|
ft·lb/in²
|
|
|
73°F
|
|
|
|
| Heat Deflection Temperature |
|
|
|
|
66 psi, Unannealed
|
|
°F
|
ISO 75-2/B |
|
66 psi, Annealed
|
|
°F
|
ISO 75-2/B |
|
264 psi, Unannealed
|
|
°F
|
ISO 75-2/A |
|
264 psi, Annealed
|
|
°F
|
ISO 75-2/A |
| Glass Transition Temperature |
|
°F
|
ISO 11357-2 |
| Melting Temperature 3 |
|
°F
|
ISO 11357-3 |
| CLTE |
|
|
|
|
Flow: 73 to 131°F
|
|
in/in/°F
|
ASTM E831 |
|
Flow: -40 to 73°F
|
|
in/in/°F
|
ISO 11359-2 |
|
Flow: 73 to 131°F
|
|
in/in/°F
|
ISO 11359-2 |
|
Flow: 131 to 320°F
|
|
in/in/°F
|
ISO 11359-2 |
|
Transverse: 73 to 131°F
|
|
in/in/°F
|
ASTM E831 |
|
Transverse: -40 to 73°F
|
|
in/in/°F
|
ISO 11359-2 |
|
Transverse: 73 to 131°F
|
|
in/in/°F
|
ISO 11359-2 |
|
Transverse: 131 to 320°F
|
|
in/in/°F
|
ISO 11359-2 |
| Surface Resistivity |
|
ohms
|
IEC 60093 |
| Volume Resistivity |
|
ohm·cm
|
IEC 60093 |
| Relative Permittivity |
|
|
IEC 60250 |
|
73°F, 100 Hz
|
|
|
|
|
73°F, 1 MHz
|
|
|
|
| Dissipation Factor |
|
|
IEC 60250 |
|
73°F, 100 Hz
|
|
|
|
|
73°F, 1 MHz
|
|
|
|
| Comparative Tracking Index |
|
V
|
IEC 60112 |
| Electric Strength |
|
|
IEC 60243-1 |
|
73°F, 0.0394 in
|
|
V/mil
|
|
|
73°F, 0.0787 in 4
|
|
V/mil
|
|
| Flame Rating - UL |
|
|
UL 94 |
|
0.0591 in
|
|
|
|
|
0.118 in
|
|
|
|
|
0.236 in
|
|
|
|
| Flammability Classification |
|
|
IEC 60695-11-10, -20 |
|
0.0591 in
|
|
|
|
|
0.118 in
|
|
|
|
|
0.236 in
|
|
|
|
| Glow Wire Flammability Index (0.118 in) |
|
°F
|
IEC 60695-2-12 |
| Oxygen Index |
|
%
|
ISO 4589-2 |
| RTI Str |
|
|
UL 746 |
|
0.0295 in
|
|
°F
|
|
|
0.0591 in
|
|
°F
|
|
|
0.118 in
|
|
°F
|
|
|
0.236 in
|
|
°F
|
|
| RTI Imp |
|
|
UL 746 |
|
0.0295 in
|
|
°F
|
|
|
0.0591 in
|
|
°F
|
|
|
0.118 in
|
|
°F
|
|
|
0.236 in
|
|
°F
|
|
| RTI Elec |
|
|
UL 746 |
|
0.0295 in
|
|
°F
|
|
|
0.0591 in
|
|
°F
|
|
|
0.118 in
|
|
°F
|
|
|
0.236 in
|
|
°F
|
|
| Comparative Tracking Index (CTI) |
|
V
|
UL 746 |
|
Product names can be difficult to match. You may have searched any one of these terms to find this product: Crastin® S600F10 NC010, Crastin S600F10 NC010, Crastin® , Crastin, CrastinS600F10NC010, S 600 F 10 NC 010, S600F10 NC010, S600, 600F, F10, 10NC, NC010, S600F10NC010, Polybutylene Terephthalate, PBT, Polyester, DuPont, PolybutyleneTerephthalate, 600S
|
|
Features may also be described by the following terms: Medium-High Viscosity, Medium Viscosity, High Viscosity, Medium High Viscosity, High Viscosity, Low Moisture Absorption, Low Water Absorption, Water Resistant, Moisture Resistant, Good Processability, Easy Processing, Good Dimensional Stability, Dimensionally Stable, Good Chemical Resistance, Chemical Resistant, Ultrasonic Weldable.
|
|
Uses may also be described by the following terms: Machine Parts, Mechanical Parts, Machine/Mechanical Parts, Thick-walled Parts, Thick Walled Parts, Thick-wall Parts, Thick Wall Parts, Thickwall Parts, Industrial Parts, Engineering Parts, Electrical Applications, Electronic Applications, Electrical/Electronic Applications, Electrical Sector, Automotive Applications, Automotive Sector.
|
|
This plastic material has approval for 1 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): GM (1).
|