Ultramid® T KR 4365 G5 BASF Polyamide 6/6T Copolymer (Glass Fiber Reinforcement, 25%)

Product Description

Glass fibre reinforced, flame-retardant grade for injection moulding. Good mechanical properties, high tracking resistance, only low tendency for deposits to form on electrical contacts, very resistant to electrolytic corrosion, resistant to solder baths; electroplateable.

General

Material Status

Commercial: Active

Availability

Europe

Filler / Reinforcement

Glass Fiber Reinforcement, 25% Filler by Weight

Additive

Flame Retardant

Features

Flame Retardant

Platable

RoHS Compliance

Forms

Pellets

Processing Method

Extrusion

Injection Molding

Multi-Point Data

Creep Modulus vs. Time (ISO 11403-1)

Isochronous Stress vs. Strain (ISO 11403-1)

Isothermal Stress vs. Strain (ISO 11403-1)

Secant Modulus vs. Strain (ISO 11403-1)

Shear Modulus vs. Temperature (ISO 11403-1)

Physical	Dry	Conditioned	Unit	Test Method
Density		--	g/cm³	ISO 1183
Molding Shrinkage (0.0591 in)		--	%	ISO 294-4
Water Absorption (Equilibrium, 73°F, 50% RH)		--	%	ISO 62
Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Modulus (73°F)			psi	ISO 527-2
Tensile Stress (Break, 73°F)			psi	ISO 527-2
Tensile Strain (Break, 73°F)			%	ISO 527-2
Impact	Dry	Conditioned	Unit	Test Method
Charpy Unnotched Impact Strength (73°F)		--	ft·lb/in²	ISO 179/1eU
Thermal	Dry	Conditioned	Unit	Test Method
Heat Deflection Temperature (264 psi, Unannealed)		--	°F	ISO 75-2/A
Melting Temperature (DSC)		--	°F	ISO 3146
Electrical	Dry	Conditioned	Unit	Test Method
Volume Resistivity		--	ohm·cm	IEC 60093
Relative Permittivity (73°F, 1 MHz)		--		IEC 60250
Dissipation Factor (73°F, 1 MHz)		--		IEC 60250
Comparative Tracking Index (Solution A)		--	V	IEC 60112
Flammability	Dry	Conditioned	Unit	Test Method
Flame Rating - UL (0.0295 in)		--		UL 94
Glow Wire Flammability Index (0.0295 in)		--	°F	IEC 60695-2-12
Glow Wire Ignition Temperature (0.0295 in)		--	°F	IEC 60695-2-13
Oxygen Index		--	%	ISO 4589-2
UL	Dry	Conditioned	Unit	Test Method
RTI Elec (0.0591 in)		--	°F	UL 746
High Amp Arc Ignition (HAI) (PLC) (0.0295 in)		--		UL 746
Additional Information
Dry	Moisture Absorption, Equilibrium, ISO 62, 23°C, 50% RH: 1.1 to 1.5% Hot wire ignition (HWI), ASTM D3874, 0.75mm: Class 2 Fire/ignition performance (UL94+HAI+HWI) min thickness, UL 746C: 0.75 mm
Related Terminology
Dry	Product names can be difficult to match. You may have searched any one of these terms to find this product: Ultramid® T KR 4365 G5, Ultramid T KR 4365 G5, Ultramid® T , Ultramid T, UltramidTKR4365G5, UltramidT, TKR 4365 G 5, TKR 4365 G5, TKR4365, KR 4365 G 5, TKR4365G5, KR 4365 G5, KR4365, 4365G, G5, KR4365G5, Polyamide 6/6T Copolymer, Polyamide 66T Copolymer, Polyamide 6:6T Copolymer, Polyamide 6+6T Copolymer, Polyamide 6-6T Copolymer, Polyamide 6_6T Copolymer, Polyamide 6 6T Copolymer, Nylon 6/6T, Nylon 66T, Nylon 6:6T, Nylon 6+6T, Nylon 6-6T, Nylon 6_6T, Nylon 6 6T, Polyamide, Nylon, BASF, Polyamide66TCopolymer, Nylon66T, Polyamide6_6TCopolymer, Nylon6_6T, 4365KR, 4365TKR
Generic Name
Dry	Generic Name may also be described by the following terms: PA6/6T.
Conditioned	Product names can be difficult to match. You may have searched any one of these terms to find this product: Ultramid® T KR 4365 G5, Ultramid T KR 4365 G5, Ultramid® T , Ultramid T, UltramidTKR4365G5, UltramidT, TKR 4365 G 5, TKR 4365 G5, TKR4365, KR 4365 G 5, TKR4365G5, KR 4365 G5, KR4365, 4365G, G5, KR4365G5, Polyamide 6/6T Copolymer, Polyamide 66T Copolymer, Polyamide 6:6T Copolymer, Polyamide 6+6T Copolymer, Polyamide 6-6T Copolymer, Polyamide 6_6T Copolymer, Polyamide 6 6T Copolymer, Nylon 6/6T, Nylon 66T, Nylon 6:6T, Nylon 6+6T, Nylon 6-6T, Nylon 6_6T, Nylon 6 6T, Polyamide, Nylon, BASF, Polyamide66TCopolymer, Nylon66T, Polyamide6_6TCopolymer, Nylon6_6T, 4365KR, 4365TKR Generic Name may also be described by the following terms: PA6/6T.

Injection	Dry	Unit
Processing (Melt) Temp		°F
Mold Temperature		°F
Extrusion	Dry	Unit
Melt Temperature		°F

Notes

¹Typical properties: these are not to be construed as specifications.

Ultramid® T KR 4365 G5

Polyamide 6/6T Copolymer

Glass Fiber Reinforcement, 25%

Supplied by BASF Corporation