IDES Prospector Already have an account? Login Here

IDES

Plexiglas® df22 8N

Polymethyl Methacrylate Acrylic

Supplied by Evonik Röhm GmbH

The technical datasheet with complete property values for Plexiglas® df22 8N is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Product Profile:
PLEXIGLAS® Satinice df22 8N, based on PLEXIGLAS® 8N, is characterized by diffuse scattering of light.

Typical properties of PLEXIGLAS® molding compound are
  • good flow
  • high mechanical strength, surface hardness and mar resistance
  • very good weather resistance.

Special properties of PLEXIGLAS® Satinice df22 8N are
  • very good lightdiffusion combined with excellent light transmission.

Application:
Used for injection molding items for lighting engineering applications

Examples:
luminaire covers, projection screens and similar applications

Processing:
PLEXIGLAS® Satinice df22 8N can be processed on injection molding machines with 3-zone general purpose screws for engineering thermoplastics.

Physical Form / Packaging:
PLEXIGLAS® Satinice df molding compounds are supplied as pellets of uniform size, packaged in 25kg polyethylene bags; other packaging on request.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Features 
  • Good Flow
  • Good Weather Resistance
  • High Hardness
  • High Strength
  • Light Stabilized
Uses 
  • Lighting Diffusers
  • Video Equipment
  
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Multi-Point Data 
  • Isothermal Stress vs. Strain (ISO 11403-1)
  • Secant Modulus vs. Strain (ISO 11403-1)
  • Shear Modulus vs. Temperature (ISO 11403-1)
  • Viscosity vs. Shear Rate (ISO 11403-2)
  
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Volume-Flow Rate (MVR) (230°C/3.8 kg)
in³/10min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2/1
Tensile Stress (Break)
psi
 ISO 527-2/5
Tensile Strain (Break)
%
 ISO 527-2/5
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
 ISO 179/1
Charpy Unnotched Impact Strength (73°F)
ft·lb/in²
 ISO 179/1eU
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
      
66 psi, Unannealed
°F
 ISO 75-2/B
264 psi, Unannealed
°F
 ISO 75-2/A
Glass Transition Temperature
°F
 IEC 1006
Vicat Softening Temperature
°F
 ISO 306/B50
CLTE - Flow (32 to 122°F)
in/in/°F
 ISO 11359-2
Flammability
Nominal Value
Unit
Test Method
Glow Wire Ignition Temperature
°F
 IEC 60695-2-13
Optical
Nominal Value
Unit
Test Method
Transmittance 2
%
 ISO 13468-2
Additional Information
Nominal Value
Unit
Test Method
Fire Rating
 
 DIN 4102
Half-Value Angle
°
 DIN 5036
Related Terminology
This supplier and product may also be known by these terms: Plexiglass

Product names can be difficult to match. You may have searched any one of these terms to find this product: Plexiglas® df22 8N, Plexiglas df22 8N, Plexiglas® , Plexiglas, Plexiglasdf228N, df 22 8 N, df22 8N, df22, 228, 8N, df228N, Acrylic, Acrylic, Polymethyl Methacrylate, Acrylic Polymethyl Methacrylate, Acrylic (PMMA), Acrylic PMMA, pmma, Evonik Rohm, AcrylicPolymethylMethacrylate, AcrylicPMMA, 22df
Features
Features may also be described by the following terms: Good Flow, High Strength, High Hardness, Hard, Good Weather Resistance, Weather Resistant.
Uses
Uses may also be described by the following terms: Lighting Diffusers, Lens.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
2D65
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.