Plexiglas df22 7H Evonik Rohm Acrylic, Polymethyl Methacrylate

Product Description

Product Profile:
PLEXIGLAS® Satinice df22 7H, based on PLEXIGLAS® 7H, is characterized by diffuse scattering of light.

Typical properties of PLEXIGLAS® molding compound are

good flow

high mechanical strength, surface hardness and mar resistance

very good weather resistance.

Special properties of PLEXIGLAS® Satinice df22 7H are

very good lightdiffusion combined with excellent light transmission

matte surfaces can be obtained by varying the extrusion parameters.

Application:
Used for extruding profiles and sheets for lighting engineering applications

Examples:
luminaire covers, displays, projection screens and similar lighting applications

Processing:
PLEXIGLAS® Satinice df22 7H can be processed on extruders with 3-zone general purpose screws for engineering thermoplastics. The matte finish of profile surfaces depends very much on machine design (calibrating unit, polishing rolls) and cooling conditions. It can be enhanced by controlled temperature reduction.

Physical Form / Packaging:
PLEXIGLAS® Satinice df molding compounds are supplied as pellets of uniform size, packaged in 25kg polyethylene bags; other packaging on request.

General

Material Status

Commercial: Active

Availability

Europe

Features

Good Flow

Good Weather Resistance

High Hardness

High Strength

Light Stabilized

Uses

Displays

Lighting Diffusers

Profiles

Sheet

Video Equipment

Forms

Pellets

Processing Method

Extrusion

Injection Molding

Multi-Point Data

Isothermal Stress vs. Strain (ISO 11403-1)

Secant Modulus vs. Strain (ISO 11403-1)

Shear Modulus vs. Temperature (ISO 11403-1)

Viscosity vs. Shear Rate (ISO 11403-2)

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Melt Volume-Flow Rate (MVR) (230°C/3.8 kg)		in³/10min	ISO 1133
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus		psi	ISO 527-2/1
Tensile Stress (Break)		psi	ISO 527-2/5
Tensile Strain (Break)		%	ISO 527-2/5
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength (73°F)		ft·lb/in²	ISO 179/1
Charpy Unnotched Impact Strength (73°F)		ft·lb/in²	ISO 179/1eU
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed		°F	ISO 75-2/B
264 psi, Unannealed		°F	ISO 75-2/A
Glass Transition Temperature		°F	IEC 1006
Vicat Softening Temperature		°F	ISO 306/B50
CLTE - Flow (32 to 122°F)		in/in/°F	ISO 11359-2
Flammability	Nominal Value	Unit	Test Method
Glow Wire Ignition Temperature		°F	IEC 60695-2-13
Optical	Nominal Value	Unit	Test Method
Transmittance²		%	ISO 13468-2
Additional Information	Nominal Value	Unit	Test Method
Fire Rating			DIN 4102
Half-Value Angle		°	DIN 5036
Related Terminology
This supplier and product may also be known by these terms: Plexiglass Product names can be difficult to match. You may have searched any one of these terms to find this product: Plexiglas® df22 7H, Plexiglas df22 7H, Plexiglas® , Plexiglas, Plexiglasdf227H, df 22 7 H, df22 7H, df22, 227, 7H, df227H, Acrylic, Acrylic, Polymethyl Methacrylate, Acrylic Polymethyl Methacrylate, Acrylic (PMMA), Acrylic PMMA, pmma, Evonik Rohm, AcrylicPolymethylMethacrylate, AcrylicPMMA, 22df
Features
Features may also be described by the following terms: Good Flow, High Strength, High Hardness, Hard, Good Weather Resistance, Weather Resistant.
Uses
Uses may also be described by the following terms: Lighting Diffusers, Lens.

Extrusion	Nominal Value	Unit
Drying Temperature		°F
Drying Time		hr
Melt Temperature		°F
Die Temperature		°F

Notes

¹Typical properties: these are not to be construed as specifications.

²D65

Plexiglas® df22 7H

Polymethyl Methacrylate Acrylic

Supplied by Evonik Röhm GmbH