IDES Prospector Already have an account? Login Here

IDES

Eastobond 19412

Copolyester

Supplied by Eastman Chemical Company

The technical datasheet with complete property values for Eastobond 19412 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Eastobond 19412 is a terephthalate-based copolyester. It is identical to our 19411 resin in every aspect, except that the 19412 has been crystallized for drying purposes and ease of handling. Eastobond 19412 may be dried in a desicated drying system at 150 F. It offers excellent organoleptic and gas-barrier properties. Eastobond 19412 has low postextrusion crystallinity and a low softening point, enabling heat-seal bonds to be achieved over a temperature range of 95°C to 205°C.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
  • South America
Features 
  • Barrier Resin
  • Crystalline
  • Good Organoleptic Properties
  • Heat Sealable
  
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Density
     ASTM D1505
-- 2
g/cm³
  
--
g/cm³
  
Apparent Density
g/cm³
 ASTM D1895
Films
Nominal Value
Unit
Test Method
Film Thickness - Tested
mil
  
Secant Modulus - MD (2.0 mil)
psi
 ASTM D882
Tensile Strength - MD (Break, 2.0 mil)
psi
 ASTM D882
Tensile Elongation - MD (Break, 2.0 mil)
%
 ASTM D882
Elmendorf Tear Strength - MD (2.0 mil)
g
 ASTM D1922
Oxygen Permeability
     ASTM D3985
86°F, 2.0 mil, 0% RH
cm³·mil/100in²/atm/24 hr
  
86°F, 2.0 mil, 68% RH 3
cm³·mil/100in²/atm/24 hr
  
Water Vapor Transmission Rate (2.0 mil)
g/100 in²/24 hr
 ASTM F372
Thermal
Nominal Value
Unit
Test Method
Melting Temperature
°F
 ASTM D3418
Specific Heat
     DSC
77°F
Btu/lb/°F
  
167°F
Btu/lb/°F
  
257°F
Btu/lb/°F
  
392°F
Btu/lb/°F
  
482°F
Btu/lb/°F
  
554°F
Btu/lb/°F
  
Thermal Conductivity
Btu·in/hr/ft²/°F
 ASTM C177
Optical
Nominal Value
Unit
Test Method
Gloss (45°, 1.97 mil)
 
 ASTM D2457
Transmittance (Regular, 1.97 mil)
%
 ASTM D1003
Haze (1.97 mil)
%
 ASTM D1003
Fill Analysis
Nominal Value
Unit
Test Method
Melt Density (482°F)
g/cm³
 ASTM D1238
Additional Information
Nominal Value
Unit
Test Method
Inherent Viscosity 4
 
 Internal Method
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Eastobond 19412, Eastobond , Eastobond19412, 19412, Copolyester, Polyester, Eastman
Features
Features may also be described by the following terms: Good Organoleptic Properties.
Notes
1Typical properties: these are not to be construed as specifications.
2Film, 0.05 mm
3MOCON
4EMN-A-AC-G-V-1
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.