IDES Prospector Already have an account? Login Here

IDES

Paxon™ BA50-120

High Density Polyethylene (MMW) Resin

Supplied by ExxonMobil Chemical

The technical datasheet with complete property values for Paxon™ BA50-120 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
BA50-120 is a high molecular weight, high density polyethylene copolymer. This resin has superior stress crack resistance, high impact strength and good rigidity.
General  
Material Status 
  • Commercial: Active
Availability 
  • Latin America
  • North America
  • South America
Additive 
  • Heat Stabilizer
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D4883
Melt Mass-Flow Rate (MFR)
     ASTM D1238
190°C/2.16 kg
g/10 min
  
190°C/21.6 kg
g/10 min
  
Environmental Stress-Cracking Resistance (100% Igepal)
hr
 ASTM D1693
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Yield)
psi
 ASTM D638
Tensile Elongation (Break)
%
 ASTM D638
Flexural Modulus
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Tensile Impact Strength (73°F)
ft·lb/in²
 ASTM D1822
Thermal
Nominal Value
Unit
Test Method
Brittleness Temperature
°F
 ASTM D746
Vicat Softening Temperature
°F
 ASTM D1525
Legal Statement
Contact your ExxonMobil Chemical Customer Service Representative for potential food contact application compliance (e.g. FDA, EU, HPFB).

This product is not intended for use in medical applications and should not be used in any such applications.
Related Terminology
This supplier and product may also be known by these terms: Exxon, Exxon Mobil, Exxon Mobile, Advanced Elastomer Systems, AES

Product names can be difficult to match. You may have searched any one of these terms to find this product: Paxon™ BA50-120, Paxon BA50120, Paxon™ , Paxon, PaxonBA50120, BA 50, BA 50 120, BA50-120, BA50120, BA50:120, BA50/120, BA50+120, BA50_120, BA50 120, BA50, 50120, Polyethylene, High Density, Polyethylene High Density, Polyethylene, High Density (MMW), Polyethylene High Density MMW, HDPE, MMW, HDPE MMW, Polyethylene, PE, ExxonMobil, PolyethyleneHighDensityMMW, HDPEMMW, 50BA
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.