IDES Prospector Already have an account? Login Here

IDES

INEOS HDPE K44-06-122

High Density Polyethylene

Supplied by INEOS Olefins & Polymers USA

The technical datasheet with complete property values for INEOS HDPE K44-06-122 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
K44-06-122 is a natural high density polyethylene copolymer designed specifically for extrusion of potable water, industrial, and mining pipe. It is recognized by the Plastic Pipe Institute as having a pipe material designation code of PE 3608 (formerly PE 3408), NSF Standard 14 certification, and complies with ANSI/NSF Standard 61 health effects requirements. A pressure rated formulation is produced whenthis product is extruded in combination with an Ineos approved black masterbatch. The resulting formulation known as K44-06-123 has NSF Standard 14 certification and complies with ANSI/NSF Standard 61 health effects requirements, is certified to CSA Standard B137.1-05 and B137.4-05, and is listed with the Plastic Pipe Institute as a PE 3608 (formerly PE3408).
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Copolymer
  • High Density
 
Uses 
  • Piping
Agency Ratings 
RoHS Compliance 
Appearance 
  • Natural Color
Forms 
  • Pellets
Processing Method 
  • Extrusion
  • Pipe Extrusion
 
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ASTM D4883
Melt Mass-Flow Rate (MFR) (190°C/21.6 kg)
g/10 min
ASTM D1238
Environmental Stress-Cracking Resistance
hr
ASTM D1693C
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2
    ASTM D638
Yield
psi
 
Break
psi
 
Tensile Elongation 2 (Break)
%
ASTM D638
Flexural Modulus - 2% Secant 3
psi
ASTM D790
Hydrostatic Design Basis
    ASTM D2837
73°F
psi
 
140°F
psi
 
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
ft·lb/in
ASTM D256
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Brittleness Temperature
°F
ASTM D746
Vicat Softening Temperature
°F
ASTM D1525
Additional Information
Nominal Value
Unit
Test Method
Cell Classification
 
ASTM D3350
PENT
day
ASTM F1473
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: INEOS HDPE K44-06-122, INEOS HDPE K4406122, INEOS HDPE , INEOSHDPEK4406122, INEOSHDPE, K 44, HDPEK 44 06 122, HDPEK 44, HDPEK44-06-122, HDPEK4406122, HDPEK44:06:122, HDPEK44/06/122, HDPEK44+06+122, HDPEK44_06_122, HDPEK44 06 122, HDPEK44, K 44 06 122, K44-06-122, K4406122, K44:06:122, K44/06/122, K44+06+122, K44_06_122, K44 06 122, K44, 4406, 06122, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, PE, Ineos USA, PolyethyleneHighDensity, 44K, 44HDPEK
Features
Features may also be described by the following terms: High Density, High Specific Gravity.
Uses
Uses may also be described by the following terms: Piping, Pipe.
Agency Ratings
This plastic material has 5 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): CSA (2), NSF (2), PPI (1).
Notes
1Typical properties: these are not to be construed as specifications.
22.0 in/min
3Method I (3 point load)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.